This automatic step for Peugeot Boxer models built from 2023 onwards ensures comfortable and safe access in everyday use. Especially for vehicles used in trade, service, or delivery operations, it significantly reduces the entry height and increases sure-footedness.
The sturdy step surface measuring 975 x 248 x 45 mm, combined with a load capacity of up to 250 kg, makes this entry solution ideal for continuous commercial use.
Why a step is useful in the Peugeot Boxer
Frequent getting in and out of the vehicle puts strain on the back and joints. An automatic step improves ergonomics, reduces the risk of missteps, and ensures greater safety in everyday work—especially in taller van models.
Electric comfort solution or mechanical robustness?
Two proven variants are available for the Peugeot Boxer:
-
Electric step with automatic extension and retraction
-
Mechanical, door-integrated version without electrical connection
Both variants are designed for durability, stability, and a maximum load capacity of 250 kg.
Suitable for Peugeot Boxer
The automatic step is compatible with the following vehicle sizes:
🚐 Vehicle sizes – Peugeot Boxer (from 2023)
| Designation |
Rear door(s) |
Wheelbase |
Overall length |
Vehicle height |
| L2H1 |
Wing doors |
3,450 mm |
5,413 mm |
2,254 mm |
| L2H2 |
Swing doors |
3,450 mm |
5,413 mm |
2,524 mm |
| L3H2 |
Swing doors |
4,035 mm |
5,998 mm |
2,524 mm |
| L3H3 |
Swing doors |
4,035 mm |
5,998 mm |
2,764 mm |
| L4H2 |
Swing doors |
4,035 mm |
6,363 mm |
2,524 mm |
| L4H3 |
Swing doors |
4,035 mm |
6,363 mm |
2,764 mm |
Note: The vehicle length can be found in the vehicle registration document under point 18, the vehicle height under point 20, and the year of manufacture under point 6 (German registration).
Electric step – automatic ease of use
The electric version extends automatically when the right-hand sliding door (passenger side) is opened and retracts again when it is closed – with an extension time of approx. 2 seconds.
- Anti-trap protection with automatic shut-off
- Status display in the driver's area
- Automatic, manual, and combined modes
- Camping mode for stationary operation
- Very low standby consumption
- Electronic end position detection
- ECE R10-compliant electronics
- Load capacity up to 250 kg
Mechanical step – reliable in continuous use
The mechanical, door-combined version operates entirely without electrical components. A sturdy actuating arm is mounted directly on the right-hand sliding door and controls the movement purely mechanically.
- No electrical connection required
- Extremely robust construction
- Low maintenance and durable
- Ideal for construction sites and fleet use
- Load capacity up to 250 kg
Electric or mechanical – the differences
🔍 Comparison – electric vs. mechanical step (Peugeot Boxer)
| Criterion |
Electric |
Mechanical |
| Activation |
Motorized via door signal |
Via door arm on the sliding door |
| Comfort |
Very high |
Robust & functional |
| Load capacity |
250 kg |
250 kg |
| Power consumption |
Very low quiescent current |
No power connection |
| Recommended for |
Service and delivery vehicles |
Commercial & construction site operations |
Conclusion: Greater safety for your Peugeot Boxer
This automatic step for Peugeot Boxer offers a reliable and durable entry solution – either electric with comfort functions or mechanical, particularly robust for tough operating conditions.
Frequently asked questions about the Peugeot Boxer step
Which Boxer models is the step suitable for?
Suitable for Peugeot Boxer models in the L2H1 to L4H3 variants.
What is the maximum load capacity?
The maximum load capacity is 250 kg.
What are the dimensions of the step surface?
The step surface measures 975 x 248 x 45 mm.
On which side of the vehicle is it installed?
It is installed exclusively on the right-hand sliding door (passenger side).
Is the step available in electric and mechanical versions?
Yes, it is available as an electric comfort version or a mechanical, door-integrated version.