Loading ramp or wheelchair ramp for vans for permanent installation
The two-piece folding ramp is ideal for continuous loading and unloading with wheeled trolleys or for transporting wheelchairs. Thanks to the supporting gas spring, it can be easily operated by just one person.
With a high load capacity of 320 kg, the ramp is suitable for transporting a large number of goods.
The loading ramp can be folded in the middle and can therefore be folded away behind the rear doors to save space.
The ramp is non-slip in rain or snow thanks to special punched-out sections.
Special rubber dampers prevent rattling noises while driving.
It is permanently mounted on the vehicle once.
Installation takes approx. 4 hours.
Note: The RLK wheelchair ramp does not comply with DIN 75078 for disabled transport vehicles if the height to be overcome exceeds 300 mm.
The ramp is available in the following sizes:
| Dimensions |
Height in the vehicle |
Width |
Weight |
Max. load capacity |
| 2,000 x 800 mm |
1,250 mm |
800 mm |
35 kg |
350 kg |
| 2,000 x 1,000 mm |
1,360 mm |
1,000 mm |
42 kg |
350 kg |
| 2,200 x 800 mm |
1,465 mm |
800 mm |
37 kg |
350 kg |
| 2,200 x 1,000 mm |
1,570 mm |
1,000 mm |
44 kg |
350 kg |
| 2,400 x 800 mm |
1,255 mm |
800 mm |
39 kg |
350 kg |
| 2,400 x 1,000 mm |
1,255 mm |
1,000 mm |
47 kg |
350 kg |
| 2,600 x 800 mm |
1,360 mm |
800 mm |
42 kg |
350 kg |
| 2,600 x 1,000 mm |
1,360 mm |
1,000 mm |
50 kg |
350 kg |
| 2,800 x 800 mm |
1,465 mm |
800 mm |
44 kg |
320 kg |
| 2,800 x 1,000 mm |
1,465 mm |
1,000 mm |
52 |
320 kg |
Ramp
features - Easy to operate with minimal effort thanks to gas pressure
spring -
Easy to install - Non-slip driving and walking
surface thanks to special hole punching - Includes complete installation accessories (star screws, counter plate)
- Rubber buffers and special locks prevent rattling
noises - For installation in rear or side
doors - Foldable, sturdy hinges guarantee a long service life
Zahlung auf Rechnung | 
So finden Sie uns
info@kurierbedarf.com
Einkauf für Schweizer Kunden