Transporter floor for Nissan Primastar with short wheelbase and double cab
Precisely fitting CNC-milled floor panel for Nissan Primastar with
Snoeks double cab ex works and from model year 2022.
For the short wheelbase with the following vehicle dimensions:
| Designation |
Wheelbase |
Overall length |
Cargo area length |
Rear door(s) |
Cargo area height |
Vehicle height |
| L1H1 |
3,098 mm |
5,080 mm |
1,419 mm |
Wing doors |
1,387 mm |
1,939 mm |
| L1H1 |
3,098 mm |
5,080 mm |
1,419 mm |
Tailgate |
1,387 mm |
1,939 mm |
Note: The vehicle length can be found in the vehicle registration document under item: 18, the vehicle height under item: 20, and the year of manufacture under item: 6. (Applies to German vehicle registration documents)
The floor panel is available in either 9 or 12 mm thickness and in gray, brown, granite look, or black with anti-slip coating.
The transporter floor is made of high-quality, weatherproof glued multiplex material.
Floor panel designs
The floor is supplied with aluminum edge protection
on the cargo door. The screen-printed floor is phenolic resin-bonded in accordance with EN 312-2/Class 3.
The coating is resistant to most common chemicals and easy to clean.
The dead weight is 6.8 kg/m² for 9 mm panels and 8.2 kg/m² for 12 mm floor panels.
The following floor panels are available:
| 1. Floor thickness color: |
9 mm brown |
| 2. Floor thickness-color: |
12 mm brown |
| 3. Floor thickness/color: |
9 mm - light gray |
| 4. Base thickness color: |
12 mm - light gray |
| 5. Floor thickness color: |
9 mm granite look |
| 6. Floor thickness color: |
12 mm granite look |
| 7. Floor thickness color: |
12 mm anti-slip/ribbed look |
| 8. Floor thickness color: |
12 mm anti-slip/black |
Fastening the floor panel
The floor is laid out from front to back in the vehicle. The panels are connected using screws, which are barely noticeable after installation and do not interfere. An adhesive sealant
should be used for fastening, which allows the floor panel to be removed again.
Features of the
floor panels - 9 mm or 12 mm thick birch
plywood - available in gray, brown,
black - non-slip hexagonal pattern or screen-printed surface
- wear-, oil-, and
water-resistant melamine coating - lightfast (no color changes due to UV radiation)
- precisely milled to fit the respective vehicle
Note: The floor panels are only suitable for double cab vehicles with box bodies!
Shipping is carried out by a freight forwarder.