Transporter floor for VW Caddy - with short wheelbase
Precisely fitting CNC-milled van floor for the VW Caddy III and Caddy IV from 2004 to 2020.
For VW Caddy with short wheelbase and the following vehicle dimensions:
| Designation |
Rear door(s) |
Wheelbase |
Overall length |
Cargo area length |
| L1H1 |
Wing doors |
2,682 mm |
4,408 mm |
1,781 mm |
| L1H1 |
Tailgate |
2,682 mm |
4,408 mm |
1,781 mm |
Note: The vehicle length can be found in the vehicle registration document under item 18, the vehicle height under item 20, and the year of manufacture under item 6. (Applies to German vehicle registration documents)
The floor panel is available in either 9 or 12 mm thickness and in gray, brown, or granite look.
The transporter floor is made of high-quality, weatherproof glued multiplex material.
Floor panel designs
The floor is supplied with aluminum edge protection on
the cargo compartment doors. The transporter floor is supplied in one piece with aluminum edge protection on the sliding door.
For vehicles without a sliding door, the floor panel is supplied in two parts.
The screen-printed floor is phenolic resin-bonded in accordance with EN 312-2/Class 3.
The coating is resistant to most common chemicals and easy to clean.
The dead weight is 6.8 kg/m² for 9 mm panels and 8.2 kg/m² for 12 mm floor panels.
The following floor panels are available:
- Transporter floor 9 mm, screen-printed, brown with lashing recesses for fastening and holes for these,
- Transporter floor 12 mm, screen printing, brown with lashing recesses for fastening,
- Transporter floor 9 mm with light gray honeycomb pattern with lashing recesses for fastening,
- Transporter floor 12 mm with light gray honeycomb pattern with lashing recesses for fastening,
- Transporter floor 9 mm with granite look and lashing recesses for fastening,
- Transporter floor 12 mm with granite look with lashing recesses for fastening,
- Transporter floor 12 mm with anti-slip coating (ribbed look) and lashing recesses for fastening
Airline rails for the floor panel
Optional airline rails can be ordered under the roof crossbars (vehicle roof rails), transverse to the direction of travel, each with a length of 0.90 meters. The floor panel is milled to fit precisely and the airline rails are glued in place.
These airline rails are ideal for securing loads with locking bars.
Airline rails for the crossbars can also be found in our online shop.
Other lengths and positions are available on request.
Features of the
floor panels - 9 mm or 12 mm
thick birch plywood - available in gray or brown
- non-slip hexagonal pattern or screen-printed surface
- wear-, oil-, and
water-resistant melamine coating - lightfast (no color changes due to UV radiation)
- milled to fit the respective vehicle
Note: The floor panels do not fit in station wagons with seat rails or double cab vehicles! Only for panel vans!
Shipping is carried out by a freight forwarder.
Zahlung auf Rechnung | 
So finden Sie uns
info@kurierbedarf.com
Einkauf für Schweizer Kunden