Black airline rail, semi-circular profile, standard 1.5 meters
The 1.5-meter-long, semi-circular, black powder-coated airline rail with a width of 50 mm is made of aluminum.
The airline rail as a black semi-circular profile is not pre-drilled and can therefore be glued outdoors using Sikaflex 554, for example, or drilled at the desired points.
Only at the ends of the airline rail is there a drill hole due to the manufacturing process. The end cap
102521499 can be ordered as an option
.
Technical properties
| Length: |
1.5 meters (1,490 mm) |
| Rail width: |
50 mm |
| Installation height: |
11.5 mm |
| Hole diameter: |
20 mm |
| Hole/grid spacing: |
25 mm |
| Material surface: |
Aluminum, black powder-coated |
| Weight: |
0.76 kg/m |
| Mounting hole: |
Undrilled |
| Made in |
EU |
Tensile strength
| Fitting/end fitting |
Single stud (102076) |
Double stud (102036) |
| Z 90° |
500 daN |
1,000 daN |
| X-Z 45° |
500 daN |
1,000 daN |
| Y-Z 45° |
400 daN |
900 daN |
Installation of the black semi-circular airline rail Standard
The above load capacities are achieved under the following conditions:
An important point when installing an airline rail is the fastening to the substrate. Different
values are achieved depending on the nature, material composition, and thickness of the substrate surface.
We recommend that you follow the manufacturer's installation guidelines.
The screws must be set at a distance of 75 mm with a metric grid spacing of 25 mm (76.2 for 25.4 mm grid)! Screws with a strength
of at least 10.9 must be used, with self-locking nuts and washers!
For standard Airline lashing rails, M6 screws must be used! The installer of the load securing
equipment is responsible for the installation and the resulting possible load! You
can find the cleaning materials and the corresponding adhesive in our small
hardware store.
Zahlung auf Rechnung | 
So finden Sie uns
info@kurierbedarf.com
Einkauf für Schweizer Kunden
