Black airline rail, semi-circular, standard, 1 meter
The black, 1-meter-long, powder-coated airline rail, with a width of 50 mm, is suitable for retrofitting in rear garages, on rear doors, or other small locations.
The airline rail, which is a black semi-circular profile, is not pre-drilled and can therefore be glued outdoors using Sikaflex 554, for example, or drilled at the desired points.
There is only one drill hole at each end of the airline rail due to the manufacturing process. The end cap
102521499 can be ordered as an option
.
Technical properties
| Length: |
1 meter (990 +- 5 mm) |
| Rail width: |
50 mm |
| Installation height: |
11.5 mm |
| Hole diameter: |
20 mm |
| Hole/grid spacing: |
25 mm |
| Material surface: |
Aluminum, black powder-coated |
| Weight: |
0.76 kg/m |
| Mounting hole: |
Undrilled |
| Made in |
EU |
LC strength
| Fitting/end fitting |
Single stud (102076) |
Double stud (102036) |
| Z 90° |
500 daN |
1,000 daN |
| X-Z 45° |
500 daN |
1,000 daN |
| Y-Z 45° |
400 daN |
900 daN |
The above load capacities are achieved under the following conditions:
An important point when installing an airline rail is the fastening to the substrate.
Depending on the nature, material composition, and strength of the substrate surface, different values are achieved.
We recommend that you follow the manufacturer's installation guidelines.
The screws must be set at a distance of 75 mm with a metric grid spacing of 25 mm (76.2 for 25.4 mm grid)! Screws with a strength
of at least 10.9 must be used, with self-locking nuts and washers!
For standard Airline lashing rails, M6 screws must be used! The installer of the load securing
equipment is responsible for the installation and the resulting possible load!
Zahlung auf Rechnung | 
So finden Sie uns
info@kurierbedarf.com
Einkauf für Schweizer Kunden
