Mounting kit for solar modules with 4-sided alignment
The mounting system for solar modules on vehicle roofs, campers, recreational vehicles, and boats is suitable for installation in 4 directions.
The movable corner mounts allow for optimized alignment of the solar module to the sun, thereby significantly increasing efficiency. This increases the projected area and reduces reflections.
Depending on the module size, the installation angle can be selected between 45 and 60 degrees. It can
also be removed in seconds for installation further away from the vehicle or boat.
The metal parts are made of 2 mm thick stainless steel. The EPDM rubber joints are also fitted with stainless steel parts.
Very robust and durable mounting system for a solar module larger than 1.50 meters, with a long mounting bracket.
The locking spring has an opening stop that also allows a small U-lock to be attached, which can be used with a padlock as an anti-theft device.
Note: It is possible to mount the mounting kit on airline rails. The track width of the airline rails must be adjusted accordingly to the mounting points of the module holder. If you want to mount the module on airline rails, please order the mounting system and the airline rails together.
The rubber feet have M8 internal threads with a length of 8 mm.
The module is delivered pre-assembled. It weighs only 3 kg.
This is only the mounting system. The solar module is not included in the scope of delivery.
- Solar module mounting system for mounting on vehicle roofs or boats
- for installation in 4 directions or quick removal
- for module lengths over 1.5 m (length of mounting bracket approx. 0.95 m)
Zahlung auf Rechnung | 
So finden Sie uns
info@kurierbedarf.com
Einkauf für Schweizer Kunden
