Black flat profile airline rail - 1.5 meters

SKU: 1025510-15S
Category: Airline rail, flat profile, standard

Black airline rail with a width of 65 mm and numerous mounting options

49,90 €

incl. 19% VAT , plus

21 In stock
Delivery time: 2 - 3 Workdays (DE - int. shipments may differ)

Description

Black airline track, flat profile – 1.5 meters

The 1.5-meter-long flat, black powder-coated aluminum airline rail can be used as a surface-mounted or flush-mounted rail.

Thanks to the wide flanges and the associated option of fastening it on the outside and inside and in the airline grid with screws or rivets, any forces that occur can be distributed evenly over a larger area.
This results in a higher possible tensile load.

The airline rail as a black flat profile is not pre-drilled and can therefore be glued with Sikaflex 554, for example, on the outside and inside, or drilled at the desired points.
Due to the manufacturing process, there are two holes on the outside of the airline rails.

Length:	1.5 meters (1,490 +/- 5 mm)
Width:	65 mm
Total height:	11 mm
Base thickness:	3.2 mm
Hole diameter:	20 mm
Hole/grid spacing:	25 mm
Weight:	690 g/m
Material:	Aluminum - powder coated
Color:	black
Made in:	EU

LC strength when fastened:
- every 75 mm opposite with an M6 DIN 7380 8.8 pan head screw

An important point when installing an airline rail is the fastening to the substrate.
Depending on the nature, material composition, and thickness of the substrate surface, different values are achieved. The installer of the load securing

equipment is responsible for the installation and the resulting possible load!