The small floor fan for vans ensures reliable, natural ventilation of the cargo area. Safe air circulation is essential, especially when transporting gas cylinders or damp cargo such as food or plants, in order to effectively reduce heat, moisture, and odors.
Small floor fan for vans
The compact floor fan effectively prevents heat build-up, supports the removal of gases, and reduces the formation of unpleasant odors in the cargo area. Thanks to its small installation dimensions, it is ideal for vehicles with limited space. Installation can be carried out easily with a hole saw and an 85 mm drill bit.
>
Technical data of the small floor fan
| Feature |
Value |
| Diameter |
80 mm |
| Outer diameter at top |
119 mm |
| Height |
93 mm |
| Cross-section |
73 cm² |
| Material |
ABS plastic |
Installation of the floor vent
Installation can be carried out outside the loading area. The floor vent is simply glued to the floor panel and does not require any complex fastening systems.
To protect the cut edge against rust and moisture, treatment with zinc spray and underbody protection is recommended. This ensures that the vehicle floor remains permanently sealed and resistant to corrosion.
Legal requirements
Strict safety regulations apply to the transport of gases. The Federal Ministry of Transport stipulates adequate ventilation and air extraction. According to the German Dangerous Goods Regulations (GGVS) and DSV 0211, two free ventilation openings must be provided – one in the roof area and one in the vehicle floor.
For ventilation to comply with the law, two openings with a free cross-section of 100 cm² each are required. These must be arranged diagonally in the vehicle. The small floor fan can be an important part of the required ventilation system.
Why a small floor vent is indispensable
Especially in vans with low cargo space volume, the air can heat up much faster or become saturated with moisture. Without functioning floor ventilation, an unhealthy mix of heat, condensation, and stagnant odors develops. The small floor fan ensures that these very problems are mitigated at an early stage – even when there is little space for conventional ventilation systems.
- Prevents rapid odor formation in small cargo areas
- Ensures permanent basic ventilation without active air flow
- Prevents moisture accumulation on tools and goods
- Supports natural air circulation in combination with roof or side wall ventilators
- Ideal for couriers, florists, delivery services, and food transport
Comparison: Small floor fan vs. other ventilation systems
The choice of the right system varies depending on the size of the van and its intended use. The small floor fan is particularly impressive in situations where compact dimensions and selective ventilation are required.
-
Small floor fan: ideal for tight installation conditions, small cargo areas, and vehicles with low body heights. Perfect for basic ventilation.
-
Large/single floor fan: offers more cross-section when more air volume needs to be extracted.
-
Duo floor vent: optimized for higher loads or damp/warm cargo; greater air flow thanks to two openings.
-
Roof ventilator: provides strong vertical air movement, ideal for vehicles with large interiors.
-
Side wall ventilator: the perfect addition for vehicles that need fresh air even when stationary.
Conclusion
The small floor fan for vans is a space-saving, efficient, and cost-effective solution for reducing heat, moisture, and gas accumulation in the cargo area. It is ideal for vehicles with limited space and for transport tasks where natural ventilation is essential.
FAQs about the small floor fan
For which vehicle types is the small floor fan suitable?
The small floor fan is particularly suitable for compact vans, delivery vehicles, and commercial vehicles with limited installation height. It is ideal when there is only limited space available for a ventilation opening.
Can the floor fan also be used without additional accessories?
Yes, the fan works independently. However, for optimal air circulation, it is often recommended to combine it with roof or side wall fans.
How is the cut edge on the vehicle floor protected?
After drilling, the cut edge should be sealed with zinc spray and underbody protection to permanently prevent rust and moisture.
Does the small floor vent meet legal requirements for gas transport?
It can be part of the ventilation system required by law, but does not replace the roof opening. For GGVS-compliant ventilation, two diagonally arranged openings of 100 cm² each are required.
How is the small floor vent attached?
The fan is usually glued directly to the floor slab. This enables quick, tight, and vibration-free installation.
Zahlung auf Rechnung | 
So finden Sie uns
info@kurierbedarf.com
Einkauf für Schweizer Kunden
