Transporter floor for Citroen Jumper - L3 - Double Cab
Precisely fitting CNC-milled van floor for Citroen Jumper with Snoeks double cab from 2006 onwards, for the medium wheelbase L3 with 4,035 mm, a loading length of 3,075 mm and a total vehicle length of 5,998 mm.
The van floor is only suitable for Snoeks double cab vehicles with a partition wall at the C-pillar!
The floor panel does not fit in a vehicle with a DURISOTTI double cab partition wall! Suitable
for the following vehicle size:
| Designation |
Wheelbase |
Overall length |
Cargo space length |
Drive type |
Cargo area height |
Vehicle height |
| L3H2 |
4,035 mm |
5,998 mm |
3,075 mm |
Combustion engine |
1,932 mm |
2,522 mm |
| L3H3 |
4,035 mm |
5,998 mm |
3,075 mm |
Combustion engine |
2,172 mm |
2,764 mm |
Note: The vehicle length can be found in the vehicle registration document under item 18, the vehicle height under item 20, and the year of manufacture under item 6. (Applies to German vehicle registration documents)
The base plate is available in either 9 or 12 mm thickness and in gray, brown, black, or granite look.
The transporter floor is made of high-quality, weatherproof glued multiplex material.
Floor panel designs
The floor panel comes with aluminum edge protection on the cargo compartment doors as standard.
The transporter floor is delivered in two parts.
The screen-printed floor is phenolic resin bonded in accordance with EN 312-2/Class 3.
The coating is resistant to most common chemicals and easy to clean.
The dead weight is 6.8 kg/m² for 9 mm panels and 8.2 kg/m² for 12 mm floor panels.
The following floor panels are available:
| 1. Base thickness color: |
9 mm-brown |
| 2. Floor thickness-color: |
12 mm brown |
| 3. Floor thickness/color: |
9 mm - light gray |
| 4. Base thickness color: |
12 mm - light gray |
| 5. Floor thickness color: |
9 mm granite look |
| 6. Floor thickness color: |
12 mm granite look |
| 7. Floor thickness color: |
12 mm anti-slip/ribbed look |
|
| 8. Floor thickness color: |
12 mm anti-slip/black |
Fastening the floor panel
The floor is laid out from front to rear in the vehicle. The panels
are connected using screws, which are barely noticeable after installation and do not interfere with anything.
The lashing recesses included in the scope of delivery are positioned in the designated holes and tightened with the original lashing eyes from the vehicle. In wide vehicles, such as the Fiat Ducato or similar, a light adhesive can also be applied between the body and the floor panel in the middle to prevent vibrations.
Airline rails for the floor panel
Airline rails can be ordered as an option under the roof crossbars (vehicle roof rails), transverse to the direction of travel.
The floor panel is milled to fit precisely and the airline rails are glued in place.
These airline rails are ideal for securing loads with locking bars.
The airline rails can only be installed in vehicle floors with a thickness of 12 mm!
Airline rails for the crossbars can also be found in our online shop.
Please contact our team separately for more information.
Features of the floor
panels - 9 mm or 12 mm thick birch
plywood - available in gray, brown, and
black - non-slip hexagonal pattern
or screen-printed surface - wear-, oil-, and
water-resistant melamine coating - lightfast (no color changes due to UV radiation)
- milled to fit the respective vehicle
Transporter floor 9 and 12 mm with brown and gray screen-printed surface
The 9 and 12 mm thick floor panels in brown and gray are made of durable Finnish plywood and feature a long-lasting slip-resistant coating.
The slip-resistant pattern on the surface is applied to the film coating of the plywood panel using a hot pressing process.
The coating on the surface is wear-resistant, slip-resistant (no anti-slip coating), moisture-resistant, has a high load-bearing capacity, and is environmentally friendly.
The granite-look base plate has a very modern appearance and is resistant to dirt.
Anti-slip floor with ribbed look—gray
Our low-wear and elastic plywood floors are manufactured exclusively with a thickness of 12 mm.
The slip-resistant coating is hygienic and easy to clean. The elastic and durable surface additionally protects the plywood from moisture.
The anti-slip floor is also very decorative and stands out visually from standard floor panels.
Anti-slip floor with black anti-slip coating
The black anti-slip floor offers a slip-resistant surface with a slip resistance value of up to 0.67µ.
The uneven structure supports the anti-slip properties and visually resembles the rhino coating on pickup surfaces.
Koskisen Oje
Tehdastie 2
16600 Järvelä
Finnland
info@koskisen.com
Zahlung auf Rechnung | 
So finden Sie uns
info@kurierbedarf.com
Einkauf für Schweizer Kunden
