The 2-meter-long lashing strap for airline rails with clamp lock is a compact and reliable solution for securing loads in vans, trailers, or commercial vehicles. Thanks to the single-stud fittings on both sides, the two-part lashing strap can be quickly and securely inserted into existing airline rails. The sturdy clamp lock enables time-saving fastening – ideal for frequent loading and unloading operations.
Product description – Lashing strap for airline rails with clamp lock
The 25 mm wide airline rail lashing strap is made of high-quality polyester webbing (PES) and achieves a lashing force (LC) of 400 daN when strapped. Up to 200 daN is possible under direct tension. The low elongation of only 5 percent ensures that the load is held securely during transport.
The fixed end with clamp lock measures 350 mm, the loose end 1,650 mm. Both ends are equipped with robust sewn fittings for airline rails. The lashing strap is particularly suitable for securing light to medium-weight transport goods such as sheet material, picture frames, or cardboard goods.
Areas of application in vehicles and trailers
The lashing strap with airline rail fitting is used wherever flexible and quick load securing is required. The self-locking single-stud system allows the end fitting to be freely positioned and securely fixed along the airline rail.
- Vans with airline rails (e.g., trades & services)
- Box vehicles and trailers
- Interior fittings for commercial vehicles
- Changing loads with frequent stops
Technical characteristics of the lashing strap
The following table provides a clear summary of the most important technical data for lashing straps for airline rails.
Technical data – lashing strap airline rail 2 m
| Feature |
Value |
| Total length |
2,000 |
| Loose end |
1,650 mm |
| Fixed end |
350 mm |
| Webbing width |
25 mm |
| Strapping tension (LC) |
400 daN |
| Tensile strength direct pull |
200 daN |
| Pre-tension force (STF) |
200 daN |
| Elongation |
5 |
| Standard |
DIN EN 12195-2 |
| Material Webbing |
Polyester (PES) |
| Fittings |
Galvanized steel / aluminum |
| Color |
Blue |
| Origin |
Made in Germany |
Advantages of the clamp lock lashing strap
The built-in clamp lock allows the load to be secured much more quickly than with conventional ratchets. This lashing strap is an efficient solution, especially for trips with many stops.
- Quick tensioning without a ratchet
- Ideal for frequent loading and unloading
- Compact design for light loads
- Chrome VI-free in accordance with REACH regulation
- Tested in accordance with DIN EN 12195-2
Difference to ratchet lashing straps
Compared to ratchet lashing straps, the clamp lock offers less pre-tensioning force, but a significant time advantage. A ratchet is still recommended for heavy or safety-critical loads. However, this lashing strap is ideal for light to medium-weight transports.
Frequently asked questions about lashing straps for airline rails
For which airline rails is the lashing strap suitable?
The lashing strap is compatible with standard airline rails and uses a single-stud fitting with a self-locking bolt.
What is the maximum load capacity?
The maximum lashing force is 400 daN in strapping and 200 daN in direct tension.
Can the lashing strap be used in road transport?
Yes, the lashing strap meets the requirements of DIN EN 12195-2 and is approved for securing loads in road transport.
When should the lashing strap no longer be used?
The lashing strap must be replaced if the webbing is damaged, the label is missing or illegible, or the fittings are deformed or corroded.
Zahlung auf Rechnung | 
So finden Sie uns
info@kurierbedarf.com
Einkauf für Schweizer Kunden
