The slim, semi-circular airline rail, measuring 2.0 meters in length, is a practical solution for flexible load securing in vans, campers, or motorhomes. Thanks to its slim design, this airline rail is particularly well suited for mounting on vehicle walls or crossbars. With a length of around two meters, it offers sufficient scope to support or secure light loads in a form-fitting manner.
Typical areas of application include the conversion of service vehicles, panel vans, or motorhomes where space-saving fastening solutions are required. This slim version is deliberately not designed for transporting heavy loads such as motorcycles or pallets.
Structure and mounting characteristics of the Slim Airline Rail
The semicircular profile was specially developed for visible surface mounting. With a rail width of only 40 mm, the airline rail blends inconspicuously into the vehicle interior and can be easily mounted on existing substructures.
The airline rail is pre-drilled with a countersunk hole for M5 screws every 100 mm. This uniform pre-drilling makes installation much easier and ensures a clean, tension-free fastening along the entire length.
Matching black end caps are available for a visually clean finish. These protect the open ends of the rail and ensure a harmonious overall appearance.
Technical properties of the airline rail – 2.0 m
Technical data of the airline rail, half-round profile, slim
| Feature |
Value |
| Length |
2.0 meters (1,990 mm ± 3 mm) |
| Rail width |
40 mm |
| Installation height |
9.5 mm |
| Hole diameter |
20 mm |
| Hole/grid spacing |
25 mm |
| Drilling distance |
100 mm |
| Countersink |
M5 |
| Material |
Aluminum – bare |
| Weight |
0.53 kg/m |
| Manufacturing |
Made in the EU |
Load capacity & application limits of the Slim Airline rail
The Slim Airline rail is designed for securing lightweight objects. In combination with suitable end fittings, furniture, boxes, or barrier bars can be reliably secured.
When using a double stud fitting, increased tensile strength can be assumed compared to simple single stud fittings. The following table shows the load values specified by the manufacturer.
LC strengths of the Slim semi-circular profile airline rail
| Load direction |
Single stud |
Double stud |
| Z 90° |
500 daN* |
500 daN* |
| X-Z 45° |
500 daN* |
500 daN* |
| Y-Z 45° |
400 daN* |
400 daN* |
Important: This slim airline rail is not suitable for high tensile loads or heavy loads such as motorcycles, machines, or pallets.
Fastening & installation instructions
Installation is usually carried out using M5 countersunk screws. The manufacturer recommends screws of strength class 10.9 in combination with washers and self-locking nuts.
Since this type of fastening is not always feasible in vehicle construction, rivet nuts or anchor nuts are often used. Protruding screw or rivet heads are not recommended, as they can interfere with the insertion of fittings or slot nuts.
Alternatively, the airline rail can also be additionally glued. The installer is always responsible for the correct design and installation.
Quality & origin
This airline rail is produced by a German manufacturer in the EU. It is expressly not an imported product from the Far East.
Advantages of the Slim semi-circular profile airline rail – 2.0 m
- Slim 40 mm semi-circular profile
- Ideal for surface mounting in vehicles
- Pre-drilled every 100 mm for easy installation
- Low weight thanks to aluminum
- Versatile use in camper and van conversions
Zahlung auf Rechnung | 
So finden Sie uns
info@kurierbedarf.com
Einkauf für Schweizer Kunden
