In the everyday working life of a VW Crafter II or MAN TGE from 03/2017 onwards, the cargo area rarely gets an easy ride. Toolboxes, machinery, parcels and transport containers are loaded and unloaded day after day – and the wheel arches projecting into the load area are particularly exposed to knocks, scratches and direct contact with cargo.
These vehicle-specific wheel arch covers made from 3 mm ABS plastic protect both the left and right wheel arch by adding an extra protective layer between the vehicle and the load. The set is suitable for vans with an otherwise unprotected cargo area as well as for vehicles that already have an existing interior lining or load area conversion.
Do these wheel arch covers fit the VW Crafter and MAN TGE from 2017?
In short: Yes. This set is designed for the VW Crafter II and MAN TGE from 03/2017 onwards. It includes two vehicle-specific ABS covers for the left and right wheel arches. The covers are made from 3 mm flexible, UV-resistant plastic.
Two closely related vans – one wheel arch protection solution
The second-generation VW Crafter and the MAN TGE are technically closely related. This is particularly useful when planning a cargo area conversion, as suitable components can be designed for both vehicle models.
That is exactly the case with these wheel arch covers: both plastic shells are designed for use in the VW Crafter II and MAN TGE from 03/2017 onwards.
Important when selecting your vehicle:
For the VW Crafter, the vehicle generation is important. This product is designed for the Crafter II from 03/2017 onwards and should not be selected solely on the basis of the model name “Crafter”.
Why is additional wheel arch protection worthwhile?
Unlike the floor and side walls, the wheel arches project noticeably into the usable cargo area. When boxes are moved, tools are stored or the van is loaded and unloaded throughout the working day, these areas are therefore particularly likely to come into direct contact with cargo.
The ABS covers are fitted over the existing wheel arches. This means that cargo comes into contact with the additional plastic shell rather than directly with the original vehicle surface.
This makes the covers particularly useful for:
-
Trade and installation vehicles carrying tools and materials
-
Courier and delivery vans with frequently changing loads
-
Service vehicles that are loaded and unloaded regularly
-
Workshop and fleet vehicles with heavily used cargo areas
3 mm ABS plastic instead of an exposed wheel arch
The covers are made from 3 mm ABS plastic. The material is flexible while still being suitable for forming a vehicle-specific wheel arch cover. The plastic is also UV-resistant.
The wheel arch cover has one clearly defined purpose: it creates an additional protective layer over the original wheel arch. It does not replace a cargo floor, side wall lining or proper load securing equipment.
Technical specifications – VW Crafter II / MAN TGE wheel arch covers
VW Crafter II / MAN TGE Wheel Arch Covers – Product Specifications
| Specification |
Details |
| Suitable for |
VW Crafter II / MAN TGE |
| Model year |
From 03/2017 onwards |
| Material |
ABS plastic |
| Material thickness |
3 mm |
| Material properties |
Flexible and UV-resistant |
| Installation options |
Clamping, screwing or bonding |
| Installation hardware |
Not included |
| Scope of delivery |
2 wheel arch covers – left and right |
A practical addition to an existing cargo area conversion
Wheel arch protection does not necessarily have to be installed as part of a completely new van conversion. The covers can also be used as an addition to existing interior lining.
This is particularly useful when the Crafter or TGE already has a cargo floor or side wall lining but the wheel arches have remained unprotected.
Alternatively, the wheel arch covers can be installed first, with other cargo area protection added later. This makes it possible to upgrade the interior step by step according to your requirements.
Wheel arch, floor or side wall – what does each type of protection do?
Combining Cargo Area Protection
| Component |
Area protected |
Particularly useful for |
| Wheel arch covers |
Left + right wheel arches |
Direct contact with cargo |
| Cargo floor |
Vehicle floor |
Frequent loading and unloading |
| Side wall lining |
Interior side walls |
More comprehensive cargo area protection |
Clamp, screw or bond – three installation options
Depending on the existing cargo area conversion and the individual installation situation, the wheel arch covers can be fitted by clamping, screwing or bonding.
The most suitable installation method for your Crafter or TGE should be chosen according to the existing vehicle interior. If a cargo floor or side wall lining is already installed, it is particularly useful to check the transitions around the wheel arches before permanently fixing the covers in place.
Installation note:
Installation hardware is not included. Screws, adhesive or other fixing materials must be selected according to the chosen installation method and the individual installation situation.
Practical tip for Crafter and TGE cargo area conversions
If you are also planning to install a new cargo floor or side wall lining, include the wheel arch covers in the planning stage. This allows you to determine how the floor, side wall lining and wheel arch covers will meet before the final installation.
If the vehicle has already been converted, first check how the existing lining runs around the wheel arches. This makes it easier to determine the most suitable fixing method.
Frequently asked questions about VW Crafter and MAN TGE wheel arch covers
Which vehicles is this set designed for?
The wheel arch covers are designed for the VW Crafter II and MAN TGE from 03/2017 onwards.
Do I receive one or two wheel arch covers?
The product is supplied as a set of two wheel arch covers, covering both the left and right wheel arches in the cargo area.
Can I retrofit the wheel arch covers to a Crafter or TGE that has already been converted?
Yes. The covers can be added to an existing interior lining. The individual installation situation and any existing floor or wall lining should be taken into account.
How thick is the ABS plastic?
The wheel arch covers are made from 3 mm ABS plastic. The material is flexible and UV-resistant.
How can the wheel arch covers be installed?
Depending on the installation situation, the covers can be fitted by clamping, screwing or bonding.
Is installation hardware included?
No. Installation hardware is not included and must be selected according to the chosen fixing method.
Targeted wheel arch protection for the Crafter II and MAN TGE
If you regularly use your VW Crafter II or MAN TGE from 03/2017 onwards as a work or transport vehicle, this set provides targeted protection for two particularly exposed areas of the cargo compartment.
The combination of a vehicle-specific shape, 3 mm ABS plastic and two covers for the left and right wheel arches makes this solution suitable both for a new cargo area conversion and for upgrading an existing interior.
There is no need to completely re-line the entire cargo area: the wheel arches can be protected exactly where tools, boxes and other cargo are particularly likely to come into contact with the vehicle during everyday use.
Payment by Invoice |
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers
