3 roof racks for Ford Transit Custom
The crossbars for the Ford Transit Custom from model year 2013 onwards and the 2nd generation Ford Custom from model year 2023 onwards are made of anodized aluminum.
Suitable for the Ford Custom with the following vehicle dimensions:
| Designation |
Rear door(s) |
Wheelbase |
Overall length |
Vehicle height |
Year |
| L1H1 |
Double doors |
2,933 mm |
4,972 mm |
1,976 mm |
2013 - 2023 |
| L1H1 |
Tailgate |
2,933 mm |
4,972 mm |
1,976 mm |
2013 - 2023 |
| L2H1 |
Tailgate |
3,300 mm |
5,339 mm |
1,976 mm |
2013 - 2023 |
| L2H1 |
Double doors |
3,300 mm |
5,339 mm |
1,976 mm |
2013 - 2023 |
| L1H1 |
Double doors |
3,100 mm |
5,050 mm |
1,958 mm |
From 2023 |
| L1H1 |
Tailgate |
3,100 mm |
5,050 mm |
1,958 mm |
From 2023 |
| L2H1 |
Double doors |
3,500 mm |
5,450 mm |
1,958 mm |
From 2023 |
| L2H1 |
Tailgate |
3,500 mm |
5,450 mm |
1,958 mm |
From 2023 |
Note: The vehicle length can be found in the vehicle registration document under item: 18, the vehicle height under item: 20 and the year of manufacture under item: 6. (Applies to German vehicle registration documents)
The crossbar is mounted on the points specified by the vehicle manufacturer. There is a covered
T-slot on the top of the carrier for attaching additional accessories.
The load capacity per carrier is 50 kg.
Installation takes 15 minutes.
The aerodynamic shape reduces wind noise and fuel consumption compared to conventional roof racks.
The delivery quantity is 3 pieces.Load capacity: 50 kg per carrier (observe the permissible roof load!) Dimensions
: 52 x 35 mm
Stable aluminum profile for high loads
Designed for continuous
use Aerodynamic shape
Elegant appearance for vans and small transporters Can be expanded
with the following accessories:
- 4x 18 cm high foldable load secures for fastening various items
- Ladder holder/clamp 44 cm wide - for ladders up to 43 cm wide
- Transport tube with a length of 20 to 4.0 meters
Cruzber
Pol. Ind. Las Salinas II, parc. 12
14960 Rute (Córdoba) Spain
Spanien
info@cruzber.com