3x KammBar Fleet steel roof rack for VW ID. Buzz
The steel roof racks for the VW ID. Buzz from model year 2022 with a short wheelbase are particularly suitable for frequent highway driving thanks to their aerodynamic shape.
For vehicles with a tailgate or wing doors and the following dimensions:
| Designation |
Rear door(s) |
Wheelbase |
Vehicle length |
Vehicle height |
Cross member length |
| L1H1 |
Wing doors |
2,989 mm |
4,712 mm |
1,932 mm |
1,200 mm |
| L1H1 |
Tailgate |
2,989 mm |
4,712 mm |
1,932 mm |
1,200 mm |
Note: The vehicle length can be found in the vehicle registration document under item: 18, the vehicle height under item: 20, and the year of manufacture under item: 6. (Applies to German vehicle registration documents)
The load capacity per carrier is 50 kg (vehicle manufacturer's specification).
Installation of Rhino steel load carriers
The installation time for the three load carriers is approx. 15 to 20 minutes.
The crossbars from Rhino Products are installed at the fixing points specified by the vehicle manufacturer.
Plastic caps can be seen on the roof of your van. The fixing points are located underneath these caps.
These plastic caps are removed and the mounting feet are screwed into place. The
mounting feet must first be attached to the roof rack. You can view
or download the installation plan in advance under "Technical Details."
Features of thecrossbars Load capacity: 50 kg per carrier (observe the permissible roof load!)
Dimensions: see technical data
sheet High-strength alloy steel
Designed for continuous use Can be expanded with a wide range of accessories
Scope of delivery: 2 pieces
Extensions and optional accessories for steel load carriers
The Pipe Tube Pro transport tube is ideal for the safe transport of long goods such as copper, aluminum, and plastic pipes.
The Safe Clamp ladder clamp can secure ladders with up to four rungs quickly and safely.
The integrated lockable lock prevents theft and is crash-tested.
Pipe Tube Pro features:
- Rubber O-ring
seal on the closures - Integrated locking
system - Strong
hinge mechanism - Material: T6 aluminum alloy with 30% glass fiber reinforced nylon PA6
- Assembly time: approx. 20 minutes
Features of the ladder clamp - Safe Clamp:- 5 times faster than standard ladder clamps
- TÜV GS -
20 g crash tested - Suitable
for up to 4 nested ladder sections - Locks are included
- Excellent corrosion protection
Rhino Products B.V.
Orionpoort 3
5971 LZ Venlo-Grubbenvorst
Niederlande
sales@rhinoproducts.eu
Payment by Invoice |
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers
