The 9 mm PE foam seal for the Easy Aero roof vent is a precision-fit replacement seal designed for installation between the roof vent housing and the vehicle roof. It is ideal for replacing an existing 9 mm seal that has been damaged during installation, become worn over time or needs replacing when the roof vent is removed and refitted.
With a material thickness of 9 mm, the seal provides a compact sealing solution and can compensate for minor irregularities between the contact surfaces. The flexible PE foam compresses during installation, helping the Easy Aero roof vent sit evenly and securely on the vehicle roof.
What is the 9 mm PE foam seal for the Easy Aero roof vent?
The 9 mm PE foam seal is a replacement seal specifically designed for the Easy Aero roof vent. Installed between the vehicle roof and the roof vent housing, it helps create a reliable seal around the mounting area. The 9 mm version is suitable for installations where this thickness matches the existing seal or the required installation setup.
When should you choose the 9 mm seal?
The correct seal thickness depends on the individual installation. The 9 mm version is particularly suitable when a seal of the same thickness was previously installed or when only a relatively small gap between the vehicle roof and roof vent housing needs to be compensated for.
Practical tip: If you are simply replacing a damaged or worn seal and the existing 9 mm version has worked correctly, using the same thickness again is generally the most straightforward choice.
Precision-fit replacement for maintenance and refitting
A roof vent seal can become damaged during installation, removal or after extended use. Whenever the Easy Aero roof vent is removed from the vehicle roof, it is therefore advisable to inspect the existing seal carefully before refitting the vent.
If the foam shows visible damage, significant compression or other signs of wear, replacing it with a new 9 mm PE foam seal can help restore the sealing surface. The flexible material adapts to the contact areas during installation and helps create an even seal.
Typical applications for the 9 mm Easy Aero seal
- Replacement of a damaged 9 mm seal
- Replacement of a worn or permanently compressed seal
- Refitting an Easy Aero roof vent
- Maintenance and repair work on the roof vent
- Installation where only a smaller gap needs to be compensated for
This replacement seal is specifically designed for the Easy Aero roof vent and should not be considered a universal roof vent seal.
Technical specifications of the 9 mm PE foam seal
Technical specifications – Easy Aero replacement seal
| Specification |
Details |
| Product |
PE foam seal |
| Compatibility |
Easy Aero roof vent |
| Material |
Polyethylene (PE) foam |
| Thickness |
9 mm |
| Function |
Seal between vehicle roof and roof vent |
| Application |
Replacement, maintenance or refitting |
9 mm or 16 mm – which Easy Aero seal do I need?
Easy Aero seal thickness comparison
| Feature |
9 mm seal |
16 mm seal |
| Material thickness |
9 mm |
16 mm |
| Design |
More compact |
Thicker |
| Gap compensation |
For smaller gaps |
For larger gaps |
| Selection |
According to installation |
According to installation |
Important: The 16 mm version does not automatically provide a better seal than the 9 mm version. The correct choice depends on the vehicle roof, installation setup and the amount of compression required.
Practical tip: Check the sealing surfaces before installation
Before fitting the new seal, make sure that the contact surfaces on both the vehicle roof and the Easy Aero roof vent are clean and free from old seal residue, dirt and other contamination. An uneven or dirty surface can prevent the foam from seating correctly.
A common installation mistake is to reuse a seal that is already damaged or permanently compressed. If the existing foam shows clear signs of deterioration, replacing it with a new seal of the correct thickness is the safer option.
Conclusion: 9 mm replacement seal for the Easy Aero roof vent
The 9 mm PE foam seal is a compact replacement solution for the Easy Aero roof vent. It is suitable for replacing an existing 9 mm seal as well as for maintenance work or when refitting the roof vent.
The flexible PE foam helps provide an even contact surface and can compensate for minor irregularities between the vehicle roof and roof vent housing. This makes it a practical replacement part when the existing Easy Aero seal needs to be renewed.
Imbema Rhiwa B.V.
Hoogeveenenweg 23
2913 LV Nieuwerkerk a/d IJssel
Niederlande
transport@imbema.com
Payment by Invoice |
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers
