With the Mercedes Sprinter, the model name alone is not enough to select the correct wheel arch covers. Different generations, drive configurations and wheel setups can affect compatibility. This set is designed for the Mercedes Sprinter W906 from 2006 onwards and the Sprinter W907 from 2018 onwards with rear-wheel drive (RWD).
The two vehicle-specific wheel arch covers made from 3 mm ABS plastic protect the left and right wheel arches inside the cargo area by creating an additional protective layer. This is particularly useful in commercially used Sprinter vans, where the projecting wheel arches frequently come into contact with tools, boxes and other cargo.
Do these wheel arch covers fit my Mercedes Sprinter?
In short: These wheel arch covers fit the Mercedes Sprinter W906 from 2006 onwards and the Mercedes Sprinter W907 from 2018 onwards with rear-wheel drive (RWD). They are not suitable for the Sprinter W910 with front-wheel drive (FWD) and not suitable for vehicles with twin rear wheels.
⚠️ Please check before ordering:✓ Mercedes Sprinter
W906 from 2006 onwards✓ Mercedes Sprinter
W907 from 2018 onwards with rear-wheel drive (RWD)✗
Not suitable for Mercedes Sprinter W910 with front-wheel drive (FWD)✗
Not suitable for vehicles with twin rear wheels
With the Sprinter, the vehicle configuration matters
Correct vehicle identification is particularly important with the Mercedes Sprinter. The name “Sprinter” covers different generations and technical configurations, so wheel arch covers should not be selected solely by model name or model year.
For this product, the distinction becomes especially important for Sprinter models from 2018 onwards: these wheel arch covers are designed for the W907 with rear-wheel drive (RWD). They are expressly not suitable for the W910 with front-wheel drive (FWD).
Vehicles with twin rear wheels are also excluded.
Mercedes Sprinter Wheel Arch Cover Compatibility
| Sprinter version |
Model year / drive |
Compatible? |
| W906 |
From 2006 onwards |
Yes |
| W907 |
From 2018 onwards, RWD |
Yes |
| W910 |
Front-wheel drive (FWD) |
No |
| Twin rear wheels |
Regardless of other vehicle specifications |
No |
Why additional wheel arch protection makes sense in a Sprinter
A Mercedes Sprinter is often used as a hard-working commercial vehicle. Toolboxes, machinery, parcels, spare parts and other cargo are regularly moved through the load compartment.
While the cargo floor and side walls can be protected over large areas, the wheel arches form two prominent projections inside the vehicle. When cargo is moved, positioned or loaded, these areas can easily become direct contact points.
The ABS covers are fitted over the existing wheel arches and create an additional plastic layer between the original vehicle surface and the cargo.
3 mm ABS protection for both wheel arches
The covers are made from 3 mm ABS plastic. The material is flexible and UV-resistant, making it suitable for the shaped, vehicle-specific protective shells.
The set includes two wheel arch covers, providing protection for both the left and right wheel arches.
They can be used as standalone wheel arch protection or incorporated into a more comprehensive cargo area conversion.
Technical specifications – Mercedes Sprinter wheel arch covers
Mercedes Sprinter W906 / W907 Wheel Arch Covers – Product Specifications
| Specification |
Details |
| Compatible models |
Mercedes Sprinter W906 / W907 |
| W906 |
From 2006 onwards |
| W907 |
From 2018 onwards with rear-wheel drive (RWD) |
| Not suitable for |
W910 front-wheel drive (FWD) / vehicles with twin rear wheels |
| Material |
ABS plastic |
| Material thickness |
3 mm |
| Material properties |
Flexible and UV-resistant |
| Installation options |
Clamping, screwing or bonding |
| Installation hardware |
Not included |
| Scope of delivery |
2 wheel arch covers – left and right |
Retrofit protection to an existing Sprinter cargo area
The wheel arch covers do not have to be installed as part of a completely new interior conversion. They can also be used as an addition to existing cargo area lining.
This is particularly useful if your Sprinter already has a cargo floor or side wall lining but the two wheel arches have remained unprotected.
For a new conversion, however, it makes sense to plan the wheel arch covers, cargo floor and side walls together. This allows the transitions between the different protective components to be considered before final installation.
Choose the installation method to suit your existing conversion
Depending on the installation situation, the ABS covers can be clamped, screwed or bonded in place.
The most suitable method depends on the individual vehicle conversion. Existing floor panels, side wall lining or other equipment may influence how the wheel arch covers can best be integrated.
Installation note:
The required installation hardware is not included. Fixings or adhesive must be selected according to the chosen installation method and the individual installation situation.
Practical tip: check your Sprinter before ordering
With this product, checking the exact vehicle specification is more important than with many other wheel arch covers. Particularly for Sprinter models from 2018 onwards, the model year alone is not enough.
Before ordering, make sure you have the correct generation and drive configuration. You should also check that your vehicle is not equipped with twin rear wheels.
A quick check before ordering is much easier than discovering during installation: Sprinter correct, model year correct – wheel arch covers still wrong. 😄
Frequently asked questions about Mercedes Sprinter wheel arch covers
Do these wheel arch covers fit the Mercedes Sprinter W906?
Yes. This set is designed for the Mercedes Sprinter W906 from 2006 onwards.
Do these wheel arch covers fit the Mercedes Sprinter W907?
Yes, they are suitable for the Mercedes Sprinter W907 from 2018 onwards with rear-wheel drive (RWD).
Does this set fit the Sprinter W910 with front-wheel drive?
No. These wheel arch covers are not suitable for the Mercedes Sprinter W910 with front-wheel drive (FWD).
Can I use these wheel arch covers on a Sprinter with twin rear wheels?
No. This product is not suitable for vehicles with twin rear wheels.
Are both wheel arch covers included?
Yes. The set includes two wheel arch covers for the left and right sides.
Can the wheel arch covers be retrofitted?
Yes. The wheel arch covers can also be added to existing cargo area lining, provided that the installation situation allows suitable access and fitting.
Is installation hardware included?
No. Installation hardware is not included. Depending on the installation situation, the covers can be clamped, screwed or bonded in place.
The right wheel arch protection starts with the right Sprinter
The 3 mm ABS wheel arch covers provide targeted protection for the left and right wheel arches of compatible Mercedes Sprinter models. The set can be incorporated into a new cargo area conversion or added to an existing interior lining.
With this product, however, the most important step comes before installation: identifying the correct vehicle configuration. The covers are suitable for the Sprinter W906 from 2006 onwards and the W907 from 2018 onwards with rear-wheel drive (RWD). W910 models with front-wheel drive and vehicles with twin rear wheels are excluded.
Checking these details before ordering ensures that you select the vehicle-specific wheel arch protection intended for your particular Sprinter configuration.
Payment by Invoice |
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers
