The Fiat Ducato from 2006 onwards is one of the most versatile large vans for both commercial and individual applications. Whether used as a tradesman's van, delivery vehicle, service van or the basis for a customised conversion, its cargo area often has to cope with intensive everyday use. The projecting wheel arches are among the areas most likely to come into contact with toolboxes, transport containers and other cargo.
This set of two vehicle-specific wheel arch covers made from 3 mm ABS plastic provides additional protection for the left and right wheel arches. The covers can be installed in an otherwise unlined Ducato or added to an existing interior conversion.
Do these wheel arch covers fit the Fiat Ducato from 2006?
In short: This set is designed for the Fiat Ducato from 2006 onwards. It includes two wheel arch covers for the left and right sides of the vehicle. The covers are made from 3 mm flexible, UV-resistant ABS plastic and can be clamped, screwed or bonded in place depending on the installation situation.
Targeted protection for a versatile cargo area
The Fiat Ducato is used for a remarkably wide range of applications, and the demands placed on its cargo area can vary just as much.
Trade vehicles carry tools and materials, delivery vans are constantly loaded with changing parcels and containers, while individually converted vehicles often include shelving, cabinets or other permanent installations. Whatever the configuration, the two wheel arches remain areas that project into the usable cargo space.
The ABS covers create an additional protective layer between the original vehicle surface and the cargo.
Suitable for trade, delivery, service and individual conversions
Additional wheel arch protection is particularly useful for Ducato vans that are regularly used for different transport and working requirements.
-
Trade vehicles carrying tools, machinery and materials
-
Delivery vans with frequently changing loads
- Service and installation vehicles
-
Mobile workshop vehicles with additional interior equipment
-
Individually converted vans where the wheel arches require separate protection
3 mm ABS plastic for wheel arch protection
The wheel arch covers are made from 3 mm ABS plastic. The material is flexible and suitable for forming a vehicle-specific protective shell around the wheel arch.
The plastic is also UV-resistant. Each cover is fitted over the existing wheel arch to create an additional protective layer.
The covers do not replace a cargo floor or side wall lining and do not perform any load-securing function.
Technical specifications – Fiat Ducato wheel arch covers
Fiat Ducato Wheel Arch Covers from 2006 – Product Specifications
| Specification |
Details |
| Vehicle |
Fiat Ducato |
| Model year |
From 2006 onwards |
| Material |
ABS plastic |
| Material thickness |
3 mm |
| Material properties |
Flexible and UV-resistant |
| Installation options |
Clamping, screwing or bonding |
| Installation hardware |
Not included |
| Scope of delivery |
2 wheel arch covers – left and right |
Integrating the wheel arch covers into a Ducato conversion
The interior of a Fiat Ducato is often customised to suit a particular job or application. A cargo floor, side wall lining, shelving systems or other equipment may already be installed or planned as part of a new conversion.
The wheel arch covers can also be used in combination with an existing interior lining. For a new conversion, it makes sense to include the wheel arches in the planning from the beginning. This makes it easier to coordinate the transitions between the covers, floor and side walls.
Which protection solution does what?
Combining Cargo Area Protection in the Fiat Ducato
| Area |
Suitable solution |
Purpose |
| Wheel arches |
Wheel arch covers |
Targeted protection for projecting areas |
| Vehicle floor |
Cargo floor |
Protection for the heavily used loading surface |
| Side walls |
Side wall lining |
Protection for the interior side surfaces |
Installation to suit the existing interior
Depending on the installation situation, the wheel arch covers can be fitted by clamping, screwing or bonding.
The most suitable method depends particularly on whether a cargo floor, wall lining or other conversion components are already installed. Before permanently fixing the covers, check how they can be integrated most cleanly into the existing interior.
Please note:
The required installation hardware is not included. Screws, adhesive or other fixing materials must be selected according to the chosen installation method.
Practical tip for individually converted Ducato vans
Fiat Ducato conversions often include shelving, cabinets or other permanent equipment positioned around the wheel arches. If you are planning this type of interior, it is worth considering the wheel arch covers before permanently installed equipment is fitted.
This keeps the wheel arch area easily accessible and allows the covers to be neatly coordinated with the floor, side walls and other conversion components.
Retrofitting is also possible in an already completed conversion, provided there is sufficient access to the wheel arches.
Frequently asked questions about Fiat Ducato wheel arch covers
Which Fiat Ducato are these wheel arch covers designed for?
The set is designed for the Fiat Ducato from 2006 onwards.
How many wheel arch covers are included?
The set includes two wheel arch covers for the left and right sides of the vehicle.
Can I retrofit the covers to a Ducato that has already been converted?
Yes. The wheel arch covers can be added to an existing interior lining, provided that the installation situation allows sufficient access and suitable fitting.
How thick is the material?
The covers are made from 3 mm ABS plastic. The material is flexible and UV-resistant.
How can the wheel arch covers be installed?
Depending on the installation situation, they can be clamped, screwed or bonded in place.
Is installation hardware included?
No. Installation hardware is not included.
Flexible wheel arch protection for a versatile Fiat Ducato
The Fiat Ducato from 2006 onwards is used in many different roles – from a traditional working van to a highly customised commercial vehicle. Cargo area protection therefore needs to be just as adaptable.
With this set of two vehicle-specific ABS wheel arch covers, the left and right wheel arches can be protected exactly where required. The 3 mm plastic covers can be installed on their own, retrofitted to an existing interior or combined with additional cargo area lining.
For a van whose interior is so often tailored to a particular job, that flexibility is a real advantage: the wheel arch protection can be incorporated where it is needed without forcing the entire cargo area conversion into a fixed layout.
Payment by Invoice |
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers
