Cargo area trim for Mercedes Sprinter - L1H2 - RWD

Cargo area trim for Mercedes Sprinter - L1H2 - RWD

SKU: 107002
Category: Mercedes cargo area trim

- Side wall paneling for Mercedes Sprinter L1H2
- For vehicles with rear-wheel and all-wheel
drive - Total vehicle length: 5
,267 mm - 4 mm
plastic honeycomb profile - 4 or 6.5 mm multiplex plywood

material selection
vehicle model
Sliding door(s)

from

499,00 €

incl. 19% VAT , plus

Available immediately
Delivery time: 0 Workdays (DE - int. shipments may differ)

Description
PDF (2)

Cargo area paneling for MB Sprinter with short wheelbase and high roof

CNC-milled side panel trim made of 4 mm thick plastic honeycomb profile or 4 or 6.5 mm light gray birch plywood, for Sprinter (906/907) from 2007 onwards.

Also for MB Sprinter models built in 2018 or later with rear-wheel and all-wheel drive!

Suitable for wheelbase L1 and high roof H2 with the following vehicle dimensions:

Designation	Wheelbase	Total length	Cargo area length	Cargo space height	Vehicle height	Drive type
L1H2	3,250 mm	5,267 mm	2,700 mm	1,650 mm	2,757 mm	Rear-wheel/all-wheel drive

Note: The vehicle length can be found in the vehicle registration document under item 18, the vehicle height under item 20, and the year of manufacture under item 6. (Applies to German vehicle registration documents)

Design and scope of delivery of the cargo area trim

The plywood lining is divided in the middle. The plastic honeycomb profile runs continuously from top to bottom (see pictures). The

interior lining is delivered in the areas specified by the vehicle manufacturer, including all wall linings, the side door lining, side door window cutouts, and the lower rear door cutouts.

The coating is resistant to most common chemicals and easy to clean.
The weight is 2.7 kg/m² for 4 mm plywood panels and 1.5 kg/m² for 4 mm plastic honeycomb panels. Uncoated

plywood is suitable for coating with fabrics or felt. The flexible but sturdy plastic honeycomb profile or the moisture-resistant gray-coated plywood is recommended for protecting the cargo area.

The mounting kit is included in the scope of delivery.
Mounting is done with self-tapping screws.
The original mounting points are not used during installation.

Features of the side wall
paneling - Precisely milled to fit your vehicle
- Mounting materials included in
delivery - 4 mm
plastic honeycomb profile - 4 or 6.5 mm multiplex plywood

Shipping is carried out by a freight forwarder.

Item information	Value
vehicle:	Mercedes Sprinter

Informationen zum Hersteller:

Koskisen Oje
Tehdastie 2
16600 Järvelä
Finnland
info@koskisen.com

Installation instructions for van floor, side wall paneling, and ceiling paneling

Installation instructions for van floor, side wall paneling, and ceiling paneling

Product information - Cargo area trim

Product information - Cargo area trim

Mon - Thu:	8:30 a.m. - 4:00 p.m.
Fri:	8:30 a.m. - 2:00 p.m.

Mon - Thu:	8:30 a.m. - 4:00 p.m.
Fri:	8:30 a.m. - 2:00 p.m.