A Peugeot Boxer from 2006 onwards is a commercial vehicle designed to work hard. Tools, boxes, parcels and materials inevitably leave their mark during everyday use – particularly on areas that project into the cargo space. The two wheel arches are exactly such areas.
With this set of two vehicle-specific wheel arch covers made from 3 mm ABS plastic, the left and right wheel arches can be protected individually. The moulded plastic covers create an additional protective layer and can be used either as standalone wheel arch protection or as an addition to an existing cargo area conversion.
Which wheel arch covers fit the Peugeot Boxer from 2006?
In short: This set is designed for the Peugeot Boxer from 2006 onwards. It includes two vehicle-specific covers for the left and right wheel arches. They are made from 3 mm flexible, UV-resistant ABS plastic and can be clamped, screwed or bonded in place depending on the installation situation.
Why the wheel arches in a Boxer are particularly exposed
Unlike the largely flat surfaces of the cargo floor and side walls, the wheel arches project noticeably into the usable cargo space. This places them exactly where cargo is moved, positioned or carried past during loading and unloading.
A toolbox does not have to tip over, nor does a transport container have to be particularly heavy to leave marks. Regular direct contact alone can take its toll over the course of a long working life.
The ABS covers are fitted over the existing wheel arches and create an additional barrier between the cargo and the vehicle surface. This allows two particularly exposed areas to be protected without having to completely refit the entire cargo compartment.
Wheel arch protection and long-term vehicle care
Of course, signs of use can never be completely avoided in a commercial vehicle – and promising otherwise would be unrealistic. A working van is meant to work.
Sensible cargo area protection can, however, help reduce direct contact between transported goods and vehicle surfaces. This can be particularly useful for vehicles that remain in service for many years, are later resold or are eventually replaced as part of a commercial fleet.
Wheel arch covers are therefore more than a cosmetic addition. They provide a straightforward way to include particularly exposed areas of the Peugeot Boxer in the overall protection of the cargo compartment.
3 mm ABS plastic – flexible and vehicle-specific
The two wheel arch covers are made from 3 mm ABS plastic. The material is flexible and UV-resistant.
The moulded plastic covers are fitted over the respective wheel arches, creating an additional protective layer without altering the function of the original wheel arch.
Wheel arch protection does not replace a durable cargo floor or side wall lining and does not provide any load-securing function. Instead, it complements these components in areas where the floor and side walls cannot provide protection due to the vehicle's construction.
Technical specifications – Peugeot Boxer wheel arch covers
Peugeot Boxer Wheel Arch Covers from 2006 – Product Specifications
| Specification |
Details |
| Vehicle |
Peugeot Boxer |
| Model year |
From 2006 onwards |
| Material |
ABS plastic |
| Material thickness |
3 mm |
| Material properties |
Flexible and UV-resistant |
| Installation options |
Clamping, screwing or bonding |
| Installation hardware |
Not included |
| Scope of delivery |
2 wheel arch covers – left and right |
Protect only the wheel arches or line the entire Boxer?
Not every Peugeot Boxer automatically needs a complete cargo area conversion. The most suitable protection depends largely on how the vehicle is actually used.
Which Areas of the Boxer Cargo Compartment Need Protection?
| Requirement |
Suitable component |
Area protected |
| Protect the wheel arches |
Wheel arch covers |
Left and right wheel arches |
| Protect the loading surface |
Cargo floor |
Vehicle floor |
| Protect the interior side surfaces |
Side wall lining |
Vehicle side walls |
| Protect several high-wear areas |
Combined cargo area lining |
Floor, side walls and wheel arches |
This makes it possible to tailor the level of protection to the vehicle's actual use. If you initially only want to cover the two wheel arches, the covers can be installed separately and additional interior protection can be added later if required.
Also suitable for existing cargo area conversions
Many Peugeot Boxer vans are already fitted with a cargo floor or side wall lining while the wheel arches remain exposed.
The ABS covers can therefore be installed as an addition to existing interior lining. A complete rebuild of the cargo compartment is not generally required.
If shelving, cabinets or other permanent equipment is already installed, check before fitting that there is sufficient access to the wheel arches.
Three installation options for different cargo area layouts
Depending on the existing cargo area conversion, the wheel arch covers can be installed by clamping, screwing or bonding.
This allows the fixing method to be adapted to the individual installation situation. With a new cargo area conversion, for example, the covers can be planned together with the floor and wall lining. When retrofitting, existing components need to be taken into account.
Important installation information:
The required installation hardware is not included. Fixings or adhesive must be selected according to the chosen installation method and the existing vehicle conversion.
Practical tip: look at how cargo actually moves through your van
When planning cargo area protection, it is worth considering one simple question: Where is the cargo actually moved during everyday work?
If boxes or machinery are regularly pushed between the wheel arches, placed next to them or moved past them from the side, these areas are particularly good candidates for additional protection.
Instead of simply lining everything, this approach puts protection exactly where your Boxer is actually exposed to everyday wear.
Frequently asked questions about Peugeot Boxer wheel arch covers
Which Peugeot Boxer are these wheel arch covers designed for?
This set is designed for the Peugeot Boxer from 2006 onwards.
Are covers for both wheel arches included?
Yes. The set includes two wheel arch covers for the left and right sides of the vehicle.
Can I protect only the wheel arches without lining the entire cargo area?
Yes. The wheel arch covers can be used specifically to protect the two wheel arches. A complete cargo area conversion is not required.
Can the wheel arch covers be retrofitted to an existing interior conversion?
Yes. The ABS covers can be added to existing interior lining, provided that the wheel arches remain sufficiently accessible for installation.
What material are the covers made from?
The two wheel arch covers are made from 3 mm ABS plastic. The material is flexible and UV-resistant.
How are the wheel arch covers installed?
Depending on the installation situation, they can be clamped, screwed or bonded in place.
Is installation hardware included?
No. The required installation hardware is not included and must be selected to suit the chosen fixing method.
Targeted protection for two exposed areas in the Peugeot Boxer
A commercial vehicle does not have to look showroom-fresh after years of hard work. Particularly in an intensively used Peugeot Boxer, signs of everyday use are simply part of the job. Even so, it makes sense to protect particularly exposed areas where this can be done with relatively little effort.
The wheel arch covers for the Peugeot Boxer from 2006 onwards do exactly that. Two vehicle-specific covers made from 3 mm ABS protect the left and right wheel arches and can be installed independently or combined with additional cargo area lining.
This gives the Boxer protection exactly where tools, boxes and transported goods are particularly likely to make contact – without necessarily having to rebuild the entire cargo compartment.
Payment by Invoice |
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers
