Aluminum checker plate floor panel for Peugeot Boxer - L2 - from 2006

Aluminum checker plate floor panel for Peugeot Boxer - L2 - from 2006

SKU: 107701-PB
Category: Peugeot aluminum checker plate floor panel

- Transporter floor for Peugeot Boxer - L2
- Total vehicle length: 5,413 mm
- Thickness: 9 or 12 mm + 1.5/2.0 mm

Ausführung
Airline rails fully assembled under the roof rails
Schiebetür(en)

from

1.289,00 €

incl. 19% VAT , plus

Available immediately
Delivery time: 0 Workdays (DE - int. shipments may differ)

Description

Aluminum checker plate transporter floor for Peugeot Boxer - L2 - from 2006

Precisely fitting CNC-milled plywood transporter floor with 1.5–2.0 mm thick aluminum checker plate for your Peugeot Boxer from 2006 onwards.

For the medium wheelbase – L2 with flat roof – H1 or high roof – H2 and the following vehicle dimensions:

Designation	Wheelbase	Overall length	Cargo area length	Cargo area height	Vehicle height
L2H1	3,450 mm	5,413 mm	3,120 mm	1,662 mm	2,254 mm
L2H2	3,450 mm	5,413 mm	3,120 mm	1,932 mm	2,522 mm

Note: The vehicle length can be found in the vehicle registration document under item: 18, the vehicle height under item: 20, and the year of manufacture under item: 6. (Applies to German vehicle registration documents)

The Opel Movano-C from model year 2022 onwards is identical in construction to the Fiat Ducato, Peugeot Boxer, and Citroen Jumper.

Versions of the floor panel with aluminum checker plate

The 9 or 12 mm thick floor panel is supplied in several parts (see drawing).
The screen-printed floor is phenolic resin bonded in accordance with EN 312-2/Class 3. An aluminum checker plate floor panel with
a thickness of 1.5 - 2.0 mm is applied to the 9 or 12 mm thick screen-printed floor.
The checker plate has a quintet arrangement.

Fastening the floor panel

The floor is laid out from the front to the rear of the vehicle. The panels are connected with screws that are barely noticeable after installation and do not interfere with anything.
The lashing recesses included in the scope of delivery are positioned in the designated holes and tightened with the original lashing eyes from the vehicle. In wide vehicles, such as the Fiat Ducato or similar, a light adhesive can also be applied between the body and the floor panel in the middle to prevent vibrations.

Airline rails for the floor panel

Optionally, airline rails can be ordered under the roof crossbars (vehicle roof rails), transverse to the direction of travel, each with a length of 1.20 meters. The floor panel is milled to fit precisely and the airline rails are glued in place.
These airline rails are ideal for securing loads with locking bars.
The airline rails can only be installed in vehicle floors with a thickness of 9 mm!
Airline rails for the crossbars can also be found in our online shop.
Other lengths and positions are available on request.

Features of the
floor panels - 9 mm or 12 mm
thick birch plywood -
1.5 - 2.0 mm aluminum checker plate surface - wear-, oil-, and
water-resistant melamine coating
- lightfast (no color changes due to UV radiation) - milled to fit the respective vehicle

Note: The floor panel does not fit in station wagons with seat rails or double cab vehicles! Only for panel vans!