Aluminum roof rack for MAN TGE and VW Crafter - L3H3
The roof rack for the MAN TGE and VW Crafter from model year 2017 onwards, with wheelbase - L3 and high roof - H3, is made of aluminum.
The lightweight and aerodynamic aluminum roof rack comes with a loading roller and a front spoiler.
The loading roller makes it easier to load and unload long, bulky items, while the front spoiler reduces driving noise and minimizes fuel consumption.
Roof racks significantly increase the storage space of your van. This makes it possible to transport more goods or tools and use the cargo space more effectively.
Installation time with 2 people is approx. 45 minutes.
The load capacity approved by the vehicle manufacturer is 150 kg. However, the tested load capacity of the roof rack is up to 180 kg.
Suitable for the L3 wheelbase of 3,640 mm and a total vehicle length of 5,986 mm:
| Designation |
Drive type |
Wheelbase |
Overall length |
Vehicle height |
Roof rack size |
| L3H3 |
Front-wheel drive FWD |
3,640 mm |
5,986 mm |
2,590 mm |
3,200 x 1,580 mm |
| L3H3 |
Rear-wheel drive/all-wheel drive RWD/AWD |
3,640 mm |
5,986 mm |
2,590 mm |
3,200 x 1,580 mm |
Note: The vehicle length can be found in the vehicle registration document under item: 18, the vehicle height under item: 20, and the year of manufacture under item: 6. (Applies to German vehicle registration documents)
Features and characteristics of the roof rack
The basic equipment includes the mounting feet, front spoiler, and loading roller.
The workmanship is high quality and, with its improved aerodynamic design, the roof rack saves fuel and generates less noise when driving at speed.
The system is robust and ideally suited for intensive use.
Thanks to the innovative mounting system, the crossbars can be inserted and positioned flexibly.
With the well-designed screw system, the roof rack can be mounted in no time.
Features at
a glance - Basic equipment includes mounting feet, front spoiler, and loading
roller - High quality with aerodynamically improved design for lower fuel consumption and less noise
- Robust system - For intensive use
- Innovative mounting system -
Quick to install by sliding in the crossbars and using the well-designed screw system - Can be expanded with extensive accessories
Optional accessories for the Cruz aluminum roof rack
The roof rack can be expanded with a wide range of accessories, including components from other manufacturers such as Rhino Products. Expandable accessories
include: ladder holders, load securers for attachment with lashing straps, transport tubes or, depending on the vehicle, a rear door ladder.
All accessories are supplied with the appropriate mounting materials where necessary.
Load securing restraints
The four 10 cm high load securing restraints are limiters that prevent the goods being transported from rolling back and forth.
Furthermore, lashing straps can be attached to the load securing restraints to secure the load.
Ladder
holder The ladder holder makes it possible to secure ladders quickly and easily without the hassle of lashing straps. Up to 4-piece
ladders can be transported.
The scope of delivery consists of one pair and always includes two ladder clamps for the front and rear.
The dead weight is: 2.5 kg
Transport tube
The aluminum transport tube is suitable for transporting long goods, such as copper pipes or roof battens. The transport tube
is available in lengths of 2 m, 3 m, and 4 m. There are closable openings at the ends.
Alternatively, the Rhino transport tube can also be mounted up to a length of 5 m.
Aluminum walkway
The walkway is suitable for walking on the roof rack.
It is easily and simply attached to the crossbars with clamps.
For longer vehicles, several sections are supplied.
Stainless steel tailgate ladder
The tailgate ladder makes it easier to load and unload the roof rack.
Bulky items can be loaded more easily, or the transport tube can be filled more easily.
The rear door ladder for rear doors with a 270-degree opening angle is attached directly to the door leaf.
For rear doors with a 180-degree opening angle, the ladder is attached to the hinge.
Alternatively, a stainless steel rear door ladder with a clamping mechanism is also available.
Installation of Cruz aluminum roof racks
The Cruz roof rack is mounted on the fixing points specified by the vehicle manufacturer.
Plastic caps can be seen on the roof of your van. The fixing points are located underneath these caps.
These plastic caps are removed and the mounting feet are screwed into place. The
mounting feet must first be attached to the roof rack. We will be
happy to send you the installation plan, or you can view it under "Technical Details."
Cruzber
Pol. Ind. Las Salinas II, parc. 12
14960 Rute (Córdoba) Spain
Spanien
info@cruzber.com
Payment by Invoice | 
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers
