Welded aluminum roof rack with integrated walkway
The roof rack for the Iveco Daily from model year 2014 onwards consists of welded base elements and is therefore particularly stable.
The aluminum makes the roof rack particularly durable and protects it against corrosion.
The centrally positioned walkway is flush-mounted in the roof rack. This allows the load to be perfectly secured on both sides of the roof rack.
The scope of delivery includes the integrated walkway, front spoiler, loading roller, and mounting kit for attachment.
The roof rack with wheelbases L1, L2, and L3 is supplied in two parts, and the wheelbase L4 is supplied in three parts.
The height between the vehicle roof and the upper edge of the roof rack is 245 mm. An extendable ladder, a rear door ladder,
ladder clamps, and transport tubes are available as options.
For vehicles with roof heights H1 and H2 and the following vehicle sizes:
| Designation |
Rear door(s) |
Wheelbase |
Total length |
Vehicle height |
Roof rack size |
Curb weight |
| L1H1 |
Wing doors |
3,000 mm |
5,080 mm |
2,280 mm |
2,700 x 1,550 mm |
31 kg |
| L2H1 |
Swing doors |
3,520 mm |
5,669 mm |
2,280 mm |
3,400 x 1,550 mm |
38 kg |
| L2H2 |
Swing doors |
3,520 mm |
5,669 mm |
2,660 mm |
3,050 x 1,550 mm |
40 kg |
| L3H2 |
Swing doors |
3,750 mm |
6,047 mm |
2,660 mm |
3,400 x 1,550 mm |
44.5 kg |
| L4H2 |
Swing doors |
4,100 mm |
7,234 mm |
2,660 mm |
4,150 x 1,550 mm |
48 kg |
Note: You will find the vehicle length in the vehicle registration document under item: 18, the vehicle height under item: 20, and the year of manufacture under item: 6. (Applies to German vehicle registration documents)
Extensions and optional accessories for aluminum roof racks
The following optional accessories can be ordered for this roof rack.
The extendable ladder is attached directly under the existing walkway. It does not put any strain on the tailgate and is also suitable for loads of up to 150 kg. Depending on the
type, it weighs between 20 and 24 kg and has a step width of 466 mm.
For taller transporters, such as four-wheel drive vehicles or double-axle panel vans, you will need the RESP4500 extension.
The aluminum tailgate ladder is clamped onto the vehicle door. Permanent installation with screws is not necessary. This is particularly interesting for leased vehicles. The steps are non-slip and therefore safe even in bad weather.
Note: Rear door ladders are only suitable for vehicles with rear doors (hinged doors).
| Width: |
255 mm |
| Length - roof height H1: |
1,400 mm |
| Length - roof height H2: |
1,690 mm |
| Load capacity: |
100 kg |
| Weight depending on model: |
Approx. 7 - 8 kg |
The lockable
transport tube is an aerodynamic loading tube for transporting long goods on the roof rack.
These are one-piece and available in lengths of 2, 3, 4, 5, and 6 meters.
The plastic end caps with profile enable minimal air resistance and a modern appearance.
The aluminum construction offers high stability with low weight.
The transport tube has an extension system that allows shorter parts to be loaded.
| Inner width: |
210 mm |
| Inner height: |
142 mm |
| Weight at 2 meters length: |
23.0 kg |
| Weight at 3 meters length: |
29.5 kg |
| Weight at 4 meters length: |
36.0 kg |
| Weight at 5 meters length: |
42.5 kg |
| Weight at 6 meters length: |
49.0 kg |
| Material: |
Anodized aluminum |
MTS - Z.I. Saint-Arnoult
28170 Châteauneuf-en-Thymerais
contact@mts-galeries.fr
Payment by Invoice |
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers
