Welded aluminum roof rack with integrated walkway
The roof rack for MAN TGE models built in 2017 or later consists of welded base elements, making it particularly sturdy.
The aluminum construction makes the roof rack particularly durable and protects it against corrosion.
The centrally positioned walkway is flush-mounted in the roof rack. This allows the load to be perfectly secured on both sides of the roof rack.
The roof rack, in combination with the pull-out ladder, also fits vehicles with factory-fitted cameras (see pictures).
The scope of delivery includes the integrated walkway, the front spoiler, the loading roller, and the mounting kit for attachment.
The roof rack with wheelbase L3 is supplied in two parts and the wheelbases L4 and L5 are supplied in three parts.
The height between the vehicle roof and the lower edge of the roof rack is 180 mm. An extendable ladder, a rear door ladder, ladder
clamps, and transport tubes are available as options.
For vehicles with roof height H2 + H3 and the following vehicle sizes:
| Designation |
Drive type |
Wheelbase |
Total length |
Vehicle height |
Roof rack size |
Unladen weight |
| L3H2 |
FWD/RWD* |
3,640 mm |
5,986 mm |
2,355/2,390 mm |
3,750 x 1,550 mm |
45 kg |
| L3H3 |
FWD/RWD* |
3,640 mm |
5,932 mm |
2,590/2,625 mm |
3,400 x 1,550 mm |
41 kg |
| L4H3 |
FWD/RWD* |
4,490 mm |
6,836 mm |
2,590/2,625 mm |
4,150 x 1,550 mm |
43 kg |
| L5H3 |
FWD/RWD* |
4,490 mm |
7,391 mm |
2,590/2,637 mm |
4,710 x 1,550 mm |
60 kg |
*FWD - front-wheel drive/RWD - rear-wheel drive
Note: The vehicle length can be found in the vehicle registration document under item: 18, the vehicle height under item: 20 and the year of manufacture under item: 6. (Applies to German vehicle registration documents)
Extensions and optional accessories for aluminum roof racks
The following optional accessories can be ordered for this roof rack.
The extendable ladder is attached directly under the existing walkway. It does not put any strain on the tailgate and is also suitable for loads of up to 150 kg. Depending on the
type, it weighs between 20 and 24 kg and has a step width of 466 mm.
For taller transporters, such as four-wheel drive vehicles or double-axle panel vans, you will need the RESP4500 extension.
The aluminum tailgate ladder is clamped onto the vehicle door. Permanent mounting with screws is not necessary. This is particularly interesting for leased vehicles. The steps are non-slip and therefore safe even in bad weather.
Note: Rear door ladders are only suitable for vehicles with rear doors (hinged doors).
| Width: |
257 mm |
| Length - roof height H2: |
1,583 mm |
| Length - roof height H3: |
1,825 mm |
| Load capacity: |
100 kg |
| Net weight: |
approx. 7 kg |
The lockable
transport tube is an aerodynamic loading tube for transporting long goods on the roof rack.
These are one-piece and available in lengths of 2, 3, 4, 5, and 6 meters.
The plastic end caps with profile ensure minimal air resistance and a modern appearance.
The aluminum construction offers high stability with low weight.
The transport tube has an extension system that allows shorter parts to be loaded.
| Inner width: |
210 mm |
| Inner height: |
142 mm |
| Weight at 2 meters length: |
23.0 kg |
| Weight at 3 meters length: |
29.5 kg |
| Weight at 4 meters length: |
36.0 kg |
| Weight at 5 meters length: |
42.5 kg |
| Weight at 6 meters length: |
49.0 kg |
| Material: |
Anodized aluminum |
MTS - Z.I. Saint-Arnoult
28170 Châteauneuf-en-Thymerais
contact@mts-galeries.fr
Payment by Invoice |
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers
