Anti-slip mat for Toyota ProAce II
Rubber mat made of 3 mm thick styrene-butadiene rubber, for Toyota ProAce II from model year 09/2016, to secure the load and prevent objects from rolling around and slipping.
The anti-slip mat is suitable for the following vehicle sizes:
| Designation |
Rear door(s) |
Wheelbase |
Overall length |
Cargo area length |
| Compact |
Wing doors |
2,925 mm |
4,609 mm |
2,162 mm |
| compact |
Tailgate |
2,925 mm |
4,609 mm |
2,162 mm |
| L1 |
Wing doors |
3,275 mm |
4,959 mm |
2,512 mm |
| L1 |
Tailgate |
3,275 mm |
4,959 mm |
2,512 mm |
| L2 |
Wing doors |
3,275 mm XL |
5,309 mm |
2,862 mm |
| L2 |
Tailgate |
3,275 mm XL |
5,309 mm |
2,862 mm |
Note: The floor panels do not fit in station wagons with seat rails or double cab vehicles! Only for panel vans!
The rubber floor consists of a 3 mm thick styrene-butadiene rubber mat.
The material is REACH compliant.
The surface of the rubber mat is additionally perforated to make it slip-resistant.
However, it is not certified as an anti-slip mat for securing loads! A sliding friction coefficient has not been determined!
Cobra SBR rubber mats are shock-absorbing, sound-absorbing, non-slip, and provide excellent insulation.
The rubber mats are suitable for the following areas of application: water, air, dry and wet chemicals, organic acids, alcohol, ketones, and aldehydes. The
rubber mats are not suitable for acids, ozone, fats, oil, lubricants, or almost all fuels.
Note: Due to the possible odor formation from the rubber, the mat is not suitable for motorhomes, transporters without partition walls, and vehicles used for food transport.
Technical data SBR rubber
- Hardness 75° Shore +/- 5 according to DIN53505
- Elongation at break 200% according to
DIN53504 - Tensile strength 3 MPa according to DIN53504
- Temperature resistance -20°C to +70°C
- Density grs/cm³ 1.5 according to DIN53508
- Compression at 70°C for 22 hours 20% according to DIN53517
Zenith Rubber Europe B.V.
Utrechtsestraatweg 230
3911 TX Rhenen
Niederlande
info@zenitheurope.com