Anti-slip mat made of 3 mm thick rubber for VW Caddy
Anti-slip mat for Caddy and Caddy Maxi - 5 from model year 2021 onwards.
Note: Only for panel vans, not for station wagons with rear seats!
If a cup holder is installed, it must be removed or cut out.
- Wheelbase L1 = 2,755 mm - Cargo area length = 1,614 mm - Total vehicle length: 4,500 mm
- Wheelbase L2 = 2,970 mm - Cargo area length = 1,967 mm - Total vehicle length: 4,853 mm
The rubber floor consists of a 3 mm thick styrene-butadiene rubber mat.
The material is REACH compliant.
The surface of the rubber mat is additionally perforated to prevent slipping.
However, it is not certified as an anti-slip mat for securing loads! A sliding friction coefficient has not been determined!
The rubber mats are suitable for the following areas of application: water, air, dry and wet chemicals, organic acids, alcohol, ketones, and aldehydes. The
rubber mats are not suitable for acids, ozone, fats, oil, lubricants, or almost all fuels.
Note: Due to the possible odor formation from the rubber, the mat is not suitable for motorhomes, transporters without partition walls, and vehicles for food transport!!!
Technical data SBR rubber
Cobra SBR rubber mats are shock-absorbing, sound-absorbing, non-slip, and provide excellent insulation.
- Hardness 75° Shore +/- 5 according to DIN53505
- Elongation at break 200% according to
DIN53504 - Tensile strength 3 MPa according to DIN53504
- Temperature resistance -20°C to +70°C
- Density grs/cm³ 1.5 according to DIN53508
- Compression at 70°C for 22 hours 20% according to DIN53517
Zenith Rubber Europe B.V.
Utrechtsestraatweg 230
3911 TX Rhenen
Niederlande
info@zenitheurope.com
Zahlung auf Rechnung | 
So finden Sie uns
info@kurierbedarf.com
Einkauf für Schweizer Kunden