Partition wall for the C-pillar in the Mercedes Sprinter
The partition made of ABS plastic is suitable for the Mercedes Sprinter from model year 2006 (type 906) and from model year 2018 (type 907) with rear-wheel drive or all-wheel drive.
The partition for the C-pillar is available with or without a window to the cargo area and with heat and sound insulation in the passenger compartment.
Items MS3-0090 and 0091 are suitable for the MB Sprinter with flat roof - H1.
The MS3-0092 attachment must also be installed in vehicles with a high roof - H2.
The partition is manufactured in accordance with DIN ISO 27956 for panel vans with a gross vehicle weight of up to 3.5t.
It is suitable for the Mercedes Sprinter with the following vehicle dimensions:
| Designation |
Drive type |
Wheelbase |
Total length |
Vehicle height |
Cargo space height |
| L1H1 |
Front-wheel drive W910 |
3,259 mm |
5,267 mm |
2,356 mm |
1,789 mm |
| L2H1 |
Front-wheel drive W910 |
3,924 mm |
5,932 mm |
2,351 mm |
1,789 mm |
| L2H2 |
Front-wheel drive W910 |
3,924 mm |
5,932 mm |
2,638 mm |
1,899 mm |
| L2H2 |
Rear-wheel/all-wheel drive W906/907 |
3,665 mm |
5,932 mm |
2,620 mm |
1,940 mm |
| L3H2 |
Rear-wheel/all-wheel drive W906/907 |
4,325 mm |
6,967 mm |
2,616 mm |
1,940 mm |
| L4H2 |
Rear-wheel/all-wheel drive W906/907 |
4,325 mm |
7,367 mm |
2,613 mm |
1,940 mm |
Note: The vehicle length can be found in the vehicle registration document under item 18, the vehicle height under item 20, and the year of manufacture under item 6. (Applies to German vehicle registration documents)
The mounting material is included in the scope of delivery.
Important note:Please only order the partition if you have the technical knowledge required to install a C-pillar partition. Depending on the
vehicle's equipment, adjustments may be necessary when installing the partition.
Features
- Material: ABS
plastic - Color:
anthracite - Delivery includes mounting hardware
- With or without window
- For roof heights H1 and H2