Cargo area lining for Nissan Townstar - L1H1
CNC-milled cargo area paneling for the Nissan Townstar from model year 2022 onwards, available in either 4 mm gray plastic honeycomb profile or 4 mm uncoated or gray-coated plywood.
Not suitable for vehicles with a roof hatch (ladder flap)!!!
Suitable for Nissan Townstar with the following vehicle dimensions:
| Rear door(s) |
Wheelbase |
Overall length |
Cargo area length |
Cargo area height |
Vehicle height |
Designation |
| Double swing doors |
2,716 mm |
4,486 mm |
1,806 mm |
1,256 mm |
1,864 mm |
L1H1 |
| Tailgate |
2,716 mm |
4,486 mm |
1,806 mm |
1,256 mm |
1,864 mm |
L1H1 |
Note: The vehicle length can be found in the vehicle registration document under item 18, the vehicle height under item 20, and the year of manufacture under item 6. (Applies to German vehicle registration documents)
Design and scope of delivery of the cargo area trim
The interior trim is delivered in the areas specified by the vehicle manufacturer, including all wall trim, side door trim, side door window cutouts, and lower rear door cutouts.
The coating is resistant to most common chemicals and easy to clean.
The dead weight is 2.7 kg/m² for 4 mm plywood panels and 1.5 kg/m² for 4 mm plastic honeycomb panels. Uncoated
plywood is suitable for coating with fabrics or felt. The flexible but stable plastic honeycomb profile or the moisture-resistant gray-coated plywood is recommended for protecting the cargo area.
The mounting kit is included in the scope of delivery.
Mounting is done with self-tapping screws.
The original mounting points are not used during installation.
Features of the side wallpaneling - Precisely milled to fit your vehicle
- Mounting materials included in
delivery - 4 mm
plastic honeycomb profile - 4 mm multiplex plywood
Shipping is carried out by a freight forwarder.
Koskisen Oje
Tehdastie 2
16600 Järvelä
Finnland
info@koskisen.com
Zahlung auf Rechnung | 
So finden Sie uns
info@kurierbedarf.com
Einkauf für Schweizer Kunden
