Cargo area paneling for Toyota ProAce Max with short wheelbase
Ready-made CNC-milled side panel lining made of 4 mm thick plastic honeycomb profile or 4 mm or 6.5 mm birch plywood, for Toyota ProAce Max from model year 2024 onwards.
For the short wheelbase L1 with flat roof H1 and the following vehicle dimensions:
| Designation |
Wheelbase |
Overall length |
Cargo area length |
Cargo area height |
Vehicle height |
| L1H1 |
3,000 mm |
4,963 mm |
2,670 mm |
1,662 mm |
2,254 mm |
Note: You will find the vehicle length in the vehicle registration document under item: 18, the vehicle height under item: 20, and the year of manufacture under item: 6. (Applies to German vehicle registration documents)
Design and scope of delivery of the cargo area trim
The interior trim is delivered in the areas specified by the vehicle manufacturer, including all wall trim, side door trim, side door window cutouts, and lower rear door cutouts.
The coating is resistant to most common chemicals and easy to clean.
The dead weight is 2.7 kg/m² for 4 mm plywood panels and 1.5 kg/m² for 4 mm plastic honeycomb panels. Uncoated
plywood is suitable for coating with fabrics or felt. The flexible but stable plastic honeycomb profile or the gray moisture-coated plywood is recommended for protecting the cargo area.
The mounting kit is included in the scope of delivery.
Mounting is done with self-tapping screws.
The original mounting points are not used during installation.
Note: The cargo area trim does not fit in station wagons with seat rails or double cab vehicles! Only for panel vans!Features of the sidewall trim - Precisely
CNC-milled for your vehicle - Mounting
hardware included - 4 mm plastic
honeycomb profile - 4 or 6.5 mm multiplex plywood
Shipping is by freight forwarder.
Koskisen Oje
Tehdastie 2
16600 Järvelä
Finnland
info@koskisen.com
Zahlung auf Rechnung | 
So finden Sie uns
info@kurierbedarf.com
Einkauf für Schweizer Kunden