Window guard for sliding door on Peugeot Expert III
The window guard for the right or left sliding door on Peugeot Expert models built from 2016 onwards serves to prevent break-ins and protect against mechanical damage from inside and outside.
The window guard is suitable for the right or left sliding door on the L2 and L3 wheelbases and only for the right sliding door on the L1 wheelbase.
The protective grille is suitable for the following vehicle sizes:
| Designation |
Rear door(s) |
Wheelbase |
Overall length |
Vehicle height |
Sliding door side |
| L1H1 |
Double doors |
2,925 mm |
4,609 mm |
1,935 mm |
Right |
| L1H1 |
Tailgate |
2,925 mm |
4,609 mm |
1,935 mm |
Right |
| L2H1 |
Double doors |
3,275 mm |
4,959 mm |
1,935 mm |
Right or left |
| L2H1 |
Tailgate |
3,275 mm |
4,959 mm |
1,935 mm |
Right or left |
| L3H1 |
Double doors |
3,275 mm XL |
5,309 mm |
1,935 mm |
Right or left |
| L3H1 |
Tailgate |
3,275 mm XL |
5,309 mm |
1,935 mm |
Right or left |
Note: You will find the vehicle length in the vehicle registration document under item: 18, the vehicle height under item: 20, and the year of manufacture under item: 6. (Applies to German vehicle registration documents)
A sturdy steel tube grille made of black powder-coated perforated steel protects your sliding door window from glass breakage and theft.
For burglary prevention and protection against mechanical damage from inside and outside.
The driver's view remains unobstructed thanks to the 25x35 mm mesh openings, while the view from the outside is severely restricted. Foam rubber
is attached to the edges to protect the paintwork from scratches and prevent vibrations in the vehicle interior.
The scope of delivery includes a window protection grille and the mounting material.
Installation of the window protection grilles
The window protection grille is manufactured to fit the right or left sliding door ex works.
The mounting points on the window protection grille must be bent at the perforated points to match the door frame.
Don't worry, bending them is child's play.
Before installation, the points for the drill holes must be marked. Then drill the holes in the door frame.
The felt strip supplied is stuck to the bent surfaces. This prevents noise transmission and vibrations in the vehicle interior.
Please clean the windows before finally installing the window grilles.
As a final step, screw the window guard in place using the screws supplied.
Features of the window protection
grilles - Steel, black
powder-coated - Protection against break-ins and theft
- Large grid for good rear visibility
- Protects the windows from slipping loads
- Quick and easy installation thanks to predefined
mounting points - Available for sliding doors, rear doors, and
tailgates - Custom-made for every delivery van
Payment by Invoice |
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers