The aluminum roof rack for Fiat Scudo III models built in 2022 or later is the ideal solution if you want to reliably transport ladders, pipes, toolboxes, or bulky materials on the roof of your vehicle. Thanks to its aerodynamic design, the roof rack is particularly suitable for frequent highway driving, as it reduces wind noise and optimizes air resistance.
Product description – sturdy roof basket made of galvanized aluminum
The roof rack consists of a robust, corrosion-resistant roof basket made of galvanized aluminum and is designed for continuous commercial use. The special shape of the cross tubes supports a smoother air flow, which reduces wind noise and makes the roof rack much more pleasant to use on a daily basis than many angular standard systems.
The rear rollers for easy loading are included in the scope of delivery. The rollers extend across the entire width of the roof rack and make it easier to slide long items such as ladders or pipes onto the rack.
The crossbars can be flexibly positioned along a rail and can therefore be optimally aligned depending on the intended use. Installation time is usually approx. 35–45 minutes.
The roof rack is TÜV-approved and crash-tested to 20 g in accordance with ECE 17.07. The height is approx. 24 cm (from the top edge of the roof to the top edge of the roof rack).
Suitable for the following vehicle sizes
The aluminum roof rack is suitable for the following Fiat Scudo III variants:
📏 Vehicle variants – Peugeot Expert III & Traveller (aluminum roof rack)
| Designation |
Rear door(s) |
Wheelbase |
Overall length |
Vehicle height |
Roof rack size |
| L1H1 |
Double doors |
2,925 mm |
4,609 mm |
1,935 mm |
2.2 m x 1.4 m |
| L1H1 |
Tailgate |
2,925 mm |
4,609 mm |
1,935 mm |
2.0 m x 1.4 m |
| L2H1 |
Double doors |
3,275 mm |
4,959 mm |
1,935 mm |
2.6 m x 1.4 m |
| L2H1 |
Tailgate |
3,275 mm |
4,959 mm |
1,935 mm |
2.4 m x 1.4 m |
| L3H1 |
Double doors |
3,275 mm XL |
5,309 mm |
1,935 mm |
3.0 m x 1.4 m |
| L3H1 |
Tailgate |
3,275 mm XL |
5,309 mm |
1,935 mm |
2.8 m x 1.4 m |
Note: You will find the vehicle length in the vehicle registration document under point 18, the vehicle height under point 20, and the year of manufacture under point 6 (applies to German vehicle registration documents).
Installation – use fixed points on the roof (no drilling required)
The aluminum roof rack from Rhino Products is mounted on the fixed points provided by the vehicle manufacturer. Plastic caps are visible on the roof – the mounting points are located underneath them. The covers are removed and the mounting feet are screwed in place. The mounting feet are first attached to the roof rack.
You can view or download the installation plan in advance under "Technical Details."
Advantages in everyday use
-
Aerodynamic crossbars for reduced wind noise
-
Sturdy roof basket made of galvanized aluminum
-
Rear rollers included for convenient loading
-
Flexible positioning of the cross bars along the rail
-
TÜV-approved and crash-tested to 20 g in accordance with ECE 17.07
- Available for tailgates and wing doors
-
More transport volume on the vehicle roof
Optional accessories for Fiat Scudo III roof racks
With the right accessories, the roof rack can be expanded to suit your needs – depending on whether you are transporting long items, ladders, or bulky loads:
Transport tube – Porte Tube Pro: Aerodynamic transport tube for long items. Profiled plastic end caps ensure low air resistance and a modern appearance. High stability with low weight, quick installation (approx. 15 minutes), load capacity up to 50 kg, lockable steel end wall, 20 g crash tested, installation without drilling.
Ladder clamp – Safe Clamp: Up to 5× faster than standard ladder clamps, TÜV GS and 20 g crash tested, suitable for up to 4 nested ladder sections. Anti-theft locks are included.
LadderStow ladder holder: Ergonomic solution for loading and unloading ladders. Made of anodized aluminum. Ideal for quickly securing and transporting ladders with up to 3 sections.
Walkway/platform (L3 only): Makes it easier to load bulky items and work on the roof. Mounting hardware is included.
Aluminum rear door ladder (wing doors only): Lightweight and sturdy, non-slip steps, including mounting hardware. Note: Rear door ladders are only suitable for vehicles with wing doors. Installation time approx. 30–45 minutes.
Conclusion
The aluminum roof rack for Fiat Scudo III from 2022 onwards impresses with its quiet, aerodynamic design, tested safety, and robust aluminum construction. With rear rollers, flexibly positionable crossbars, and optional professional accessories, it is a well-thought-out solution for trade, service, and transport.
FAQ – Aluminum roof rack for Fiat Scudo III from 2022
How can I tell if my Fiat Scudo III has the right mounting points for the roof rack?
On the Fiat Scudo III from 2022 onwards, the fixing points are usually hidden under the plastic covers on the roof. If you can see these covers (usually small caps), the fixing points are normally present and the roof rack can be screwed on there – without drilling.
What size roof basket is best if I frequently transport long items?
If you regularly transport pipes, cable ducts, or ladders, a roof basket that is as long as possible is advantageous. For the Scudo III, the appropriate basket size is selected depending on the vehicle length (L1/L2/L3) so that the long items are stable and handling during loading is easier.
Are the rear rollers only intended for ladders?
No, the rear rollers are universally useful: they not only make it easier to slide ladders onto the rack, but also pipes, profiles, square timbers, or other bulky items. This means that the load is pulled less over edges during loading.
Can I configure the roof rack so that there is space for a roof box and a ladder at the same time?
Yes, the crossbars can be moved flexibly along the rail. This allows you to adjust the setup so that, for example, a roof box sits securely and a ladder or long goods can also be positioned safely – depending on the required distance and center of gravity.
Which extension is useful if I often transport pipes or rod material?
The Porte Tube Pro transport tube is particularly practical for frequent transport of long items. It protects the material from the weather, ensures a tidy appearance, and can simplify load securing – ideal for installation companies and service vehicles.
Are there any accessories that make working on the roof of the L3 vehicle easier?
Yes, a platform/walking plate is available for the L3 vehicle length. This makes it easier to move around on the roof rack, e.g., when lashing down or handling bulky loads. The necessary mounting hardware is included.
Rhino Products B.V.
Orionpoort 3
5971 LZ Venlo-Grubbenvorst
Niederlande
sales@rhinoproducts.eu
Payment by Invoice |
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers
