Side electric step E1 for VW Crafter, MAN TGE - FWD

Side electric step E1 for VW Crafter, MAN TGE - FWD

SKU: 110E1-VC17FWD
Category: elektrische Seitentrittstufe

- Electric step in three widths
- Slip resistance R13 according to DIN 75078-1
- Duplex
coating - For front-wheel drive

Stufengröße:

from

1.265,00 €

incl. 19% VAT , plus

Available immediately
Delivery time: 2 - 3 Workdays (DE - int. shipments may differ)

Description
PDF (1)

Side electric step for VW Crafter and MAN TGE

For the MAN TGE and VW Crafter from model year 2017 onwards with front-wheel drive (FWD) with the following wheelbases

:- Wheelbase L3: 3,640 mm with a cargo area length of 3,450 mm and a total vehicle length of 5,986
mm - Wheelbase L4: 4,490 mm with a cargo area length of 4,300 mm and a total vehicle length of: 6,836 mm
- Wheelbase L5: 4,490 mm with a cargo area length: 4,855 mm and a total vehicle length of: 7,391 mm

The step can be ordered for either the sliding door on the driver's side or the passenger side.

The electric side step features a high-quality aluminum surface. When extended
, the step surface measures 600 x 300 mm, 1,000 x 300 mm.
The electric step can bear loads of up to 250 kg. This means that several people can get in and out at the same time.

The E1 step features a closed cassette system for a long service life and protection against environmental influences.
The R13 slip resistance is higher than required by DIN 75078-1 (KMP).
A POWER MODE for a short-term increase in power supply helps with difficulty due to protection or other adversities.
The yellow reflective strip is particularly easy to see when

getting in and out.

Dimensions/weight:	600 x 300 mm/20 kg
Dimensions/weight:	1,000 x 300 mm/33 kg
Load capacity:	250 kg
Vehicle:	MAN TGE, VW Crafter
Wheelbase:	L3+L4+L5
Drive type:	Front-wheel drive
Year of manufacture:	From 2017
Certification:	CE marking/ECE R10 certificate
Slip resistance:	R13 according to DIN 51130
Displacement space:	V04 according to DIN 51130
Installation time:	Approx. 4 hours

Features at a glance:

- CE
marking - ECE R10 certificate
- Duplex-coated housing
- Slip resistance R13 according to DIN
51130 - Displacement space V04
according to DIN 51130 - High abrasion resistance (aluminum oxide grain)
- UV-resistant and
temperature-stable- Resistant to chemicals (oil, brake fluid, etc.)
- Classification C according to DIN
51097 - Running board covering tested for 1,000,000 steps
- Standby mode I- Simple emergency release
- Automatic
collision detection - Automatic load detection (15kg)
- Automatic or manual mode

The following items are included in the scope of delivery:

- Integrated collision detection
- Load detection/automatic or manual mode
- Vehicle-specific installation kit
- Warning light
- Cable
set - Door contact switch

Item information	Value
:	VW Crafter MAN TGE

Montageanleitung für elektrische E1 Trittstufe

Anbauanleitung für die elektrische Trittstufe am MAN TGE und VW Crafter mit Frontantrieb

Montageanleitung für vollautomatische und elektrische Trittstufe mit LED Beleuchtung am MAN TGE und VW Crafter mit Frontantrieb ab Baujahr 2017.

Montageanleitung für elektrische E1 Trittstufe

Others also bought:

Rigid rear step for VW Crafter and MAN TGE

449,00 € *

Mo - Do:	8:30 - 16:00 Uhr
Fr:	8:30 - 14:00 Uhr

Mo - Do:	8:30 - 16:00 Uhr
Fr:	8:30 - 14:00 Uhr