Steel roof rack for Ford Custom I
The roof rack for the Ford Custom I
built between 2013 and 2023 is made of steel.
Important note: For vehicles with a H2 high roof, the vehicle manufacturer does not provide any mounting points.
To attach the load carriers, holes must be drilled into the vehicle roof! Suitable
for the following vehicle sizes:
| Designation |
Rear door(s) |
Wheelbase |
Overall length |
Vehicle height |
Roof rack size |
| L1H1 |
Double doors |
2,933 mm |
4,972 mm |
1,976 mm |
2.8 m x 1.4 m |
| L1H1 |
Tailgate |
2,933 mm |
4,972 mm |
1,976 mm |
2.8 m x 1.4 m |
| L2H1 |
Tailgate |
3,300 mm |
5,339 mm |
1,976 mm |
3.2 m x 1.4 m |
| L2H1 |
Double doors |
3,300 mm |
5,339 mm |
1,976 mm |
3.2 m x 1.4 m |
| L1H2 |
Double doors |
2,933 mm |
4,972 mm |
2,380 mm |
2.0 m x 1.26 m |
| L2H2 |
Double doors |
3,300 mm |
5,339 mm |
2,380 mm |
2.6 m x 1.26 m |
Note: The vehicle length can be found in the vehicle registration document under item: 18, the vehicle height under item: 20 and the year of manufacture under item: 6. (Applies to German vehicle registration documents)
- Load capacity: 180 kg (observe the permissible roof load specified by the manufacturer!)
- Installation time: approx. 45 minutes with 2 people
- Basic equipment includes
mounting feet and front spoiler - High quality with aerodynamically improved
design for lower fuel consumption and less noise - Robust system - for intensive use
- Innovative mounting system - quick to install by inserting the cross struts and
using a sophisticated screw system- 2-year corrosion protection warranty - stainless steel thanks to special surface treatment
- Can be expanded with
extensive accessories
The roof rack can be expanded with the following accessories
Ladder
holder The ladder holder allows ladders to be secured quickly and easily without the need for complicated lashing straps. Up to 4-piece
ladders can be transported.
The scope of delivery consists of one pair and always includes two ladder clamps for the front and rear.
The dead weight is: 2.5 kg
Loading
roller/ladder roller The loading roller makes it easier to load and unload long, bulky goods. The loading rollers are
available for all vehicle types with wing doors or double doors. Unfortunately, they
cannot be installed on vehicles with tailgates, as the tailgate would hit the loading roller when opened.
Transport tube
The aluminum transport tube is suitable for transporting long goods, such as copper pipes or roof battens. The transport tube
is available in lengths of 2 m, 3 m, and 4 m. There are closable openings at the ends.
Alternatively, the Rhino transport tube can also be mounted up to a length of 5 m.
Walkway
The walkway is suitable for walking on the roof rack.
It is easily and simply attached to the crossbars with clamps.
For longer vehicles, several sections are supplied.
Cruzber
Pol. Ind. Las Salinas II, parc. 12
14960 Rute (Córdoba) Spain
Spanien
info@cruzber.com
Zahlung auf Rechnung | 
So finden Sie uns
info@kurierbedarf.com
Einkauf für Schweizer Kunden