Black airline rail, semi-circular profile, standard, 2 meters
Two-meter-long black powder-coated airline rail as a 50 mm wide semi-circular profile made of aluminum.
The airline rail as a black semi-circular profile is not pre-drilled and can therefore be glued outdoors with Sikaflex 554, for example, or drilled at the desired points.
Only at the ends of the airline rail is there a drill hole due to manufacturing reasons.
The end cap
102521499 can be ordered as an option.
Technical properties
| Length: |
2 meters (1,995 mm) |
| Rail width: |
50 mm |
| Installation height: |
11.5 mm |
| Hole diameter: |
20 mm |
| Hole/grid spacing: |
25 mm |
| Material surface: |
Aluminum, black powder-coated |
| Weight: |
0.76 kg/m |
| Mounting hole: |
Undrilled |
| Made in |
EU |
LC strength
| Fitting/end fitting |
Single stud (102076) |
Double stud (102036) |
| Z 90° |
500 daN |
1,000 daN |
| X-Z 45° |
500 daN |
1,000 daN |
| Y-Z 45° |
400 daN |
900 daN |
The above load capacities are achieved under the following conditions:
An important point when installing an airline rail is the fastening to the substrate.
Depending on the nature, material composition, and strength of the substrate surface, different values are achieved.
We recommend that you follow the manufacturer's installation guidelines.
The screws must be set at a distance of 75 mm with a metric grid spacing of 25 mm (76.2 for 25.4 mm grid)! Screws with a strength
of at least 10.9 must be used, with self-locking nuts and washers!
For standard Airline lashing rails, M6 screws must be used! The installer of the load securing
equipment is responsible for the installation and the resulting possible load!
Payment by Invoice | 
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers
