The lashing strap with ratchet and snap hook, measuring 2.3 meters in length, is a robust solution for securing loads in road transport. The combination of a two-piece strap, powerful ratchet, and secure snap hook makes this tensioning strap particularly suitable for applications that require high lashing force and reliable attachment to lashing eyes. In combination with our 0.5-meter-long round slings or 1-meter-long round slings, the lashing strap can also be used for transporting heavy motorcycles.
Product description – Tension belt with snap hook and ratchet
The two-piece tensioning strap achieves a tensile force of 2,000 daN in strapping (LC) and 1,000 daN in direct tension. The maximum elongation of 7 percent ensures that the load remains stable even during longer transports.
The short fixed end of 300 mm (ratchet side) facilitates lashing in confined spaces and enables clean, controlled pre-tensioning.
Secure hold thanks to snap hooks with locking springs
The snap hooks have a tensioned locking spring, which prevents the hook from slipping out unintentionally after it has been attached to the lashing eye. The opening width of 16 mm is suitable for many common lashing points and eyelets.
The ratchet and snap hooks are chromium(VI)-free in accordance with the REACH regulation. The lashing strap is manufactured by a German brand and is designed for professional use.
Technical characteristics of the lashing strap
The most important technical data for the lashing strap with snap hook can be found in the following overview.
Technical data – lashing strap with ratchet and snap hook 2.3 m
| Feature |
Value |
| Total length |
2.3 m |
| Length at loose end |
2,000 mm |
| Length of fixed end |
300 mm |
| Webbing width |
35 mm |
| Tensile strength of strapping (LC) |
2,000 daN |
| Tensile strength direct pull |
1,000 daN |
| Pre-tension force (STF) |
240 daN |
| Hand force (SHF) |
50 daN |
| Elongation |
max. 7 |
| Standard |
DIN EN 12195-2 |
| Manufactured in |
Germany |
Advantages of the tensioning strap with snap hook
Thanks to its high lashing force, secure hook mechanism, and powerful ratchet, this lashing strap is ideal for demanding applications.
- Snap hook with locking spring to prevent accidental unhooking
- High lashing force: 2,000 daN LC in strapping
- Short fixed end for confined spaces
- Ratchet and fittings are chromium(VI)-free in accordance with REACH
- Manufactured in accordance with DIN EN 12195-2
Care instructions for lashing straps with ratchet
The ratchet should be cleaned and lightly oiled at regular intervals. Regular maintenance is recommended, especially when used outdoors, to prevent corrosion and loss of function.
Disposal of tension belts and lashing straps
There is no fixed expiration date for lashing straps. The decisive factor is the so-called replacement date. This describes when a tensioning strap may no longer be used for safety reasons.
Webbing damage
- Yarn breaks due to heavy wear
- Yarn cuts of more than 10% at the selvedge
- Damaged or split seams
- Deformation due to heat
- Damage caused by aggressive substances such as acids or chemicals
Damage to ratchet and fittings
- Wear on gears or tensioning mechanism
- Deformed or broken tension lever
- Cracks, breaks, or permanent deformation
- Severe corrosion
- Expansion of the hook by more than 5%
Marking
- Missing or illegible label
If any of these points apply, the lashing strap must no longer be used.
Label color and material information
The color of the label provides information about the material of the webbing. As a rule, only polyester webbing (PES) may be used for load securing in road transport.
Blue = polyester (PES)
Brown = polypropylene (PP)
Green = polyamide
White = other materials
Distinction from hook lashing straps without carabiners
Compared to classic hooks, the snap hook with locking spring offers additional protection against accidental unhooking. This makes this tensioning strap particularly suitable for transports with vibrations or changing load situations where maximum security of the connection is important.
Frequently asked questions about lashing straps with ratchets and snap hooks
What is the lashing strap with carabiner hook particularly suitable for?
The lashing strap is suitable for applications with high requirements for lashing force and secure hold on lashing eyes, e.g., in the transport and logistics sector.
What does 2,000 daN LC mean in strapping?
LC is the lashing capacity. 2,000 daN in strapping describes the permissible load when strapping; in direct tension, it is 1,000 daN.
What is the advantage of the snap hook with locking spring?
The locking spring prevents the snap hook from accidentally slipping out of the lashing eye after it has been attached.
When is a lashing strap ready for disposal?
The lashing strap must no longer be used if the webbing is damaged, the ratchet or fittings are damaged, or the label is missing or illegible.
Payment by Invoice | 
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers
