The set of 10 lashing straps for securing loads is ideal for regular use in vans, trailers, or on loading areas. With a length of 4 meters, a width of 35 mm, and a standard-compliant design in accordance with DIN EN 12195-2, these lashing straps offer a reliable solution for professional users and vehicle fleets.
Lashing strap set for securing loads in vans – 10 pieces, 4 meters each
Each lashing strap included in the set is made up of two parts and is designed for use with factory-fitted lashing eyes in vans and car trailers. The sturdy pressure ratchet achieves a pre-tensioning force (STF) of 200 daN and enables the load to be secured evenly.
The PES webbing used is designed for a lashing capacity (LC) of up to 2,000 daN and has a low elongation of only 5%. The fixed end of each strap is 500 mm long, while the loose end measures 3,500 mm.
Double pointed hooks for flexible securing points
All ten lashing straps are equipped with robust double-pointed hooks at the loose and fixed ends. These are suitable for standard lashing eyes in transport vehicles and trailers. To ensure safe force transmission, make sure that the lashing eye is correctly positioned in the hook base.
Polyester webbing in accordance with DIN EN 12195-2
The orange polyester webbing (PES) is abrasion-resistant, weather-resistant, and approved for use in road traffic. Under direct tension, the permissible load is reduced to 1,000 daN. The low elongation ensures that the load remains securely fixed even on longer journeys.
Each individual lashing strap in the set has a blue label with all the information required by DIN EN 12195-2. The label must be present and legible at both ends, otherwise the strap may no longer be used.
Industrial ratchet with defined pre-tensioning force
The built-in industrial pressure ratchet is designed for a standard hand force (SHF) of 50 daN and efficiently transfers this into a preload force of 200 daN. With regular cleaning and care, it guarantees long and reliable use.
Ratchets and double-pointed hooks are chrome VI-free and meet the requirements of the REACH regulation. All lashing straps in the set are TÜV-tested.
Technical data (per lashing strap)
Technical data – lashing strap 4 m (set of 10)
| Feature |
Value |
| Set contents |
10 lashing straps |
| Webbing width |
35 mm |
| Total length |
4,000 mm |
| Length of loose end |
3,500 mm |
| Length of fixed end |
500 mm |
| Tensile force strapping (LC) |
2,000 daN |
| Tensile force direct pull |
1,000 daN |
| Pre-tension force (STF) |
200 daN |
| Hand force (SHF) |
50 daN |
| Elongation |
5 |
| Standard |
DIN EN 12195-2 |
| Material |
Polyester (PES) |
| Test mark |
TÜV |
Note: The double-pointed hooks are not suitable for rod lashing rails. Special end fittings such as flat hooks are required for this purpose.
Disposal and care of lashing straps
There is no fixed expiration date for lashing straps. However, they are considered ready for disposal as soon as safety-related damage such as broken threads, cuts, damaged seams, deformations, severe corrosion, or a missing or illegible label is present.
To maintain their value, it is recommended that the ratchets be cleaned regularly and lightly lubricated, especially if they are used frequently outdoors.
FAQ – Lashing strap set 10× 4 m for load securing
Who is the set of 10 particularly suitable for?
The set of 10 is ideal for vehicle fleets, craft businesses, logistics companies, and users with regular securing requirements. The uniform design allows several loading units to be secured efficiently and in accordance with standards.
Are all lashing straps in the set identical?
Yes, all ten lashing straps are identical in design and have the same technical properties such as length, width, LC, STF, and SHF values. This enables consistent handling and calculation of load securing.
Can I secure multiple loading points at the same time with the set?
Yes, the set allows several loading points or individual packages to be secured at the same time. The set of 10 offers a high degree of flexibility, especially for palletized goods or segmented loads.
How should the load capacity be assessed when using several straps at the same time?
Each lashing strap has its own lashing capacity (LC). When used correctly, the LC values of several straps can be added together, provided they are used symmetrically and in accordance with the usual rules for load securing.
Do all straps in the set have to be discarded at the same time?
No. Each lashing strap is assessed individually. If one strap is damaged or the label is illegible, only that individual lashing strap needs to be discarded – the remaining straps in the set can continue to be used.
Are the lashing straps in the set TÜV-tested?
Yes, all lashing straps in the set of 10 are TÜV-tested and comply with the requirements of DIN EN 12195-2. Each strap has its own label that complies with the standard.
Are the double-pointed hooks suitable for all lashing rails?
The double-pointed hooks are designed for classic lashing eyes. They are not compatible with rod lashing rails. Special end fittings such as flat hooks are required for this application.
Payment by Invoice |
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers
