The lashing strap set with 10 straps, each 6 meters long, is designed for extensive securing tasks in vans and trailers. The longer strap length offers additional flexibility for bulky or large-volume load units. All lashing straps in the set comply with DIN EN 12195-2 and are TÜV-tested.
Lashing strap set for securing loads in vans – 10 × 6 meters
Each lashing strap in the set is made up of two parts and is designed for use with factory lashing eyes. The built-in pressure ratchet achieves a pre-tension force (STF) of 200 daN and ensures that the load is secured evenly.
The PES webbing can be loaded with a lashing capacity (LC) of up to 2,000 daN and has a low elongation of only 5%. The fixed end of each strap measures 500 mm, while the loose end offers sufficient length for larger securing distances at 5,500 mm.
Double pointed hooks for versatile applications
All ten lashing straps are equipped with robust double-pointed hooks at the loose and fixed ends. These are designed for standard lashing eyes in vans and car trailers. To ensure safe force transmission, make sure that the lashing eye is correctly positioned in the hook base.
Polyester webbing for road transport
The orange polyester webbing (PES) is abrasion-resistant, weather-resistant, and approved for use in road traffic. Under direct tension, the permissible tensile force is reduced to 1,000 daN. The low elongation ensures stable pretension even on longer journeys.
Each individual lashing strap in the set has a blue label with all the information required by DIN EN 12195-2. The label must be present and legible at both ends, otherwise the lashing strap is no longer considered usable.
Industrial ratchet with defined hand force
The industrial pressure ratchet used is designed for a standard hand force (SHF) of 50 daN and efficiently transfers this into a preload force of 200 daN. Regular cleaning and maintenance ensure long-term reliable operation.
Ratchets and double-pointed hooks are chrome VI-free and meet the requirements of the REACH regulation. All lashing straps in the set are TÜV-tested.
Technical data (per lashing strap)
Technical data – lashing strap 6 m (set of 10)
| Feature |
Value |
| Set contents |
10 lashing straps |
| Webbing width |
35 mm |
| Total length |
6,000 mm |
| Length of loose end |
5,500 mm |
| Length of fixed end |
500 mm |
| Tensile force strapping (LC) |
2,000 daN |
| Tensile strength direct pull |
1,000 daN |
| Pre-tension force (STF) |
200 daN |
| Hand force (SHF) |
50 daN |
| Elongation |
5 |
| Standard |
DIN EN 12195-2 |
| Webbing material |
Polyester (PES) |
| Material Ratchet / fittings |
Galvanized steel |
| Test mark |
TÜV |
Note: The double-pointed hooks are not suitable for lashing rails. Suitable end fittings such as flat hooks are required for this application.
Replacement and maintenance
There is no fixed expiration date for lashing straps. However, each strap in the set must be checked individually. Damage to the strap, ratchet, hooks, or a missing or illegible label will result in the respective lashing strap being ready for disposal.
To maintain value, regular cleaning and light lubrication of the ratchets is recommended, especially for frequent outdoor use.
FAQ – Lashing strap set 10× 6 m (35 mm) for load securing
What are the advantages of a set of 10 x 6 m straps in everyday use?
The set of 10 x 6 m lashing straps is particularly practical when frequently changing load sizes need to be secured. The additional length makes it easier to strap large packages and also allows several loading areas to be secured with identical equipment.
Can I cover different lashing points in the vehicle with the set?
Yes. The 6 meters per strap allow both nearby and more distant lashing eyes to be used flexibly. This is helpful when cargo is distributed over the entire loading area or when lashing points vary depending on the vehicle model.
How can the set be sensibly divided between several vehicles?
Since all lashing straps in the set are identical in design, they can easily be distributed across multiple vehicles. This facilitates standardized processes in the fleet because the handling and technical parameters always remain the same.
What do I need to consider when using several straps to secure a load?
Multiple straps can be used in combination to secure the load stably. It is important to arrange them evenly and symmetrically and to choose the right type of lashing (e.g., strapping). Each strap has its own LC rating, which is included in the design when used correctly.
When using multiple straps, how can I quickly tell if a strap needs to be discarded?
Each lashing strap in the set is checked individually. Typical exclusion criteria are cuts in the strap, damaged seams, deformed hooks, severe corrosion, or a missing or illegible label. If necessary, only the affected strap is discarded.
Is the 6 m set also suitable for outdoor use?
The PES webbing is robust and suitable for practical use. For long-term reliable operation, regular cleaning and light lubrication of the ratchets is recommended, especially for outdoor use, to ensure that the tensioning mechanism and spring parts remain smooth-running.
Does the hook fit into every lashing rail?
The double-pointed hooks are designed for lashing eyes. In rod lashing rails, they usually do not fit behind the rods. Suitable end fittings such as flat hooks are required for this application.
Zahlung auf Rechnung | 
So finden Sie uns
info@kurierbedarf.com
Einkauf für Schweizer Kunden
