Two aluminum roof crossbars for MAN TGE and VW Crafter
The sturdy roof crossbars for MAN TGE and VW Crafter models built in 2017 or later are made of anodized aluminum.
The bars are suitable for the following wheelbases and roof heights:
| Designation |
Drive type |
Wheelbase |
Total length |
Vehicle height |
| L3H2 |
FWD/RWD* |
3,640 mm |
5,986 mm |
2,355/2,390 mm |
| L3H3 |
FWD/RWD* |
3,640 mm |
5,932 mm |
2,590/2,625 mm |
| L4H3 |
FWD/RWD* |
4,490 mm |
6,836 mm |
2,590/2,625 mm |
| L5H3 |
FWD/RWD* |
4,490 mm |
7,391 mm |
2,590/2,637 mm |
The crossbar is mounted at the points specified by the vehicle manufacturer or, if a C-rail is available, on this rail. There is a covered
T-slot on the top of the carrier for attaching additional accessories.
The load capacity per carrier is 50 kg.
Installation takes 15 minutes.
The distance between the top edge of the vehicle roof and the top edge of the roof rack is approx. 12–13 cm.
The aerodynamic shape reduces wind noise and fuel consumption compared to conventional roof racks.
The delivery quantity is 2 pieces. - Load capacity: 50 kg per carrier (observe the permissible roof load!)
- Dimensions: 52 x 35 mm
- Sturdy aluminum profile
for high loads - Designed
for continuous use -
Aerodynamic shape - Elegant look for vans and small transporters
The roof rack can be expanded with the following accessories
Load securing:
- 4x 10 cm high load secures for fastening various items
Ladder holder:
-
Suitable for ladders with up to four sections - Scope of delivery: 2 ladder
clamps - Dimensions: 482 x 55 x 115 mm
- Weight: 2.5 kg per pair
Cruzber
Pol. Ind. Las Salinas II, parc. 12
14960 Rute (Córdoba) Spain
Spanien
info@cruzber.com
Zahlung auf Rechnung | 
So finden Sie uns
info@kurierbedarf.com
Einkauf für Schweizer Kunden
