The Fiat Doblò III from 2022 onwards is available with short and long wheelbase versions. When selecting the correct wheel arch protection, the vehicle length is particularly important: both L1H1 and L2H1 are covered, but the wheel arch covers must be shortened for the L1 version.
The set includes two vehicle-specific wheel arch covers made from 3 mm HDPE/ABS plastic for the left and right wheel arches. The material is flexible and UV-resistant, making the covers a practical addition to the cargo area of a Doblò used for trade, service or delivery work.
Which wheel arch covers fit my Fiat Doblò III?
In short: These wheel arch covers are designed for the Fiat Doblò III from 2022 onwards in L1H1 and L2H1 versions with either a tailgate or rear barn doors. Important: for the short L1 version, the wheel arch covers must be shortened before installation. The set includes two flexible, UV-resistant covers made from 3 mm HDPE/ABS plastic.
⚠️ Important for Fiat Doblò III L1:
For the short L1H1 version, the wheel arch covers must be shortened to fit the vehicle.
The longer L2H1 version does not require this L1-specific shortening.
Fiat Doblò III L1 or L2 – check the vehicle dimensions
The Fiat Doblò III is available in two relevant vehicle lengths. The shorter L1H1 has a wheelbase of 2,785 mm, while the longer L2H1 has a wheelbase of 2,975 mm.
Both versions can be equipped with either a tailgate or rear barn doors. The following table makes it easier to identify your vehicle before ordering:
Fiat Doblò III – Vehicle Dimensions for L1H1 and L2H1
| Version |
Rear doors |
Wheelbase |
Overall length |
Vehicle height |
| L1H1 |
Tailgate |
2,785 mm |
4,403 mm |
1,844 mm |
| L1H1 |
Rear barn doors |
2,785 mm |
4,403 mm |
1,844 mm |
| L2H1 |
Tailgate |
2,975 mm |
4,753 mm |
1,844 mm |
| L2H1 |
Rear barn doors |
2,975 mm |
4,753 mm |
1,844 mm |
The difference in overall vehicle length is also easy to identify: the L1H1 measures 4,403 mm, while the L2H1 measures 4,753 mm. Both versions have a listed vehicle height of 1,844 mm.
Why protect the wheel arches in the Doblò cargo area?
The Fiat Doblò III is a compact Commercial Vehicle that makes efficient use of its available cargo space. This also means that tools, boxes, parcels and other cargo are frequently positioned or moved close to the wheel arches.
Because the wheel arches project into the cargo compartment, they are exposed to direct contact during everyday loading and unloading.
The shaped plastic covers fit over the left and right wheel arches and provide an additional protective layer in these areas.
3 mm HDPE/ABS plastic – flexible and UV-resistant
According to the product specification, the wheel arch covers are made from 3 mm HDPE/ABS plastic. The material is flexible and UV-resistant.
The scope of delivery includes two shaped covers – one for the left and one for the right wheel arch.
The covers can be used as standalone wheel arch protection or added to existing interior lining. They do not replace a cargo floor, side wall lining or any required load-securing equipment.
Technical specifications – Fiat Doblò III wheel arch covers
Fiat Doblò III Wheel Arch Covers – Product Specifications
| Specification |
Details |
| Vehicle |
Fiat Doblò III |
| Model year |
From 2022 onwards |
| Vehicle versions |
L1H1 / L2H1 |
| Rear doors |
Tailgate or rear barn doors |
| Material |
HDPE/ABS plastic |
| Material thickness |
3 mm |
| Material properties |
Flexible and UV-resistant |
| L1 installation |
Wheel arch covers must be shortened |
| Installation options |
Clamping, screwing or bonding |
| Installation hardware |
Not included |
| Scope of delivery |
2 wheel arch covers – left and right |
Special requirement for the short L1 version
The L1H1 version requires an additional installation step: the wheel arch covers must be shortened to suit the shorter vehicle version.
This is an important difference when preparing the installation. Before cutting or fitting the covers, check the position and required fit around both wheel arches in the vehicle.
Important installation note for L1:
The wheel arch covers are suitable for the short L1 version, but must be shortened during installation. Check the required fit on the vehicle before trimming the material.
Can be added to an existing interior conversion
The wheel arch covers can also be installed as an addition to existing interior lining.
If a cargo floor or other interior panels are already fitted while the wheel arches remain exposed, the covers can be added separately where sufficient installation space is available.
Where shelving, storage systems or other fixed equipment is already installed, check accessibility around both wheel arches before starting installation.
Installation by clamping, screwing or bonding
Depending on the cargo area setup, the wheel arch covers can be installed by clamping, screwing or bonding.
The most suitable fixing method depends on the existing or planned interior conversion and the components surrounding the wheel arches.
Installation hardware:
The required installation hardware is not included. Screws, adhesive or other fixings must be selected to suit the chosen installation method and the individual vehicle setup.
Practical tip: identify L1 or L2 before installation
Before ordering and installing the wheel arch covers, check whether your Fiat Doblò III is the short L1H1 or the longer L2H1.
The easiest reference points are the wheelbase and overall vehicle length: L1 = 2,785 mm wheelbase and 4,403 mm overall length; L2 = 2,975 mm wheelbase and 4,753 mm overall length.
This check is particularly important for the L1, because knowing you have the short version after you start fitting the covers is approximately one measurement too late. 😄
Frequently asked questions about Fiat Doblò III wheel arch covers
Which Fiat Doblò III versions are these wheel arch covers suitable for?
The covers are designed for the Fiat Doblò III from 2022 onwards in L1H1 and L2H1 versions with either a tailgate or rear barn doors.
Do the wheel arch covers fit the short L1 version?
Yes. However, for the L1 version the wheel arch covers must be shortened during installation.
How can I distinguish L1 from L2?
The L1 has a wheelbase of 2,785 mm and an overall length of 4,403 mm. The L2 has a wheelbase of 2,975 mm and an overall length of 4,753 mm.
Does it matter whether my Doblò has a tailgate or rear barn doors?
No. The listed L1H1 and L2H1 versions include vehicles with either a tailgate or rear barn doors.
Are covers for both wheel arches included?
Yes. The set includes two wheel arch covers – one for the left and one for the right wheel arch.
What material are the wheel arch covers made from?
According to the product specification, the covers are made from 3 mm HDPE/ABS plastic. The material is flexible and UV-resistant.
Can the wheel arch covers be added to existing interior lining?
Yes. The covers can be fitted as an addition to existing interior lining, provided that sufficient installation space is available around the wheel arches.
Is installation hardware included?
No. The installation hardware required for the chosen fixing method is not included.
Wheel arch protection for the short and long Fiat Doblò III
These vehicle-specific wheel arch covers provide targeted protection for the left and right wheel arches of the Fiat Doblò III from 2022 onwards.
The set is suitable for both L1H1 and L2H1 and includes two flexible, UV-resistant covers made from 3 mm HDPE/ABS plastic. For the shorter L1 version, the covers must be shortened during installation.
Once the vehicle length has been identified and the L1-specific adjustment taken into account, the covers can be integrated into a new cargo area conversion or added to an existing interior setup.
Payment by Invoice |
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers
