The Fiat Doblò K9 from 2022 combines compact vehicle dimensions with a versatile cargo area. Whether it is used for tools and materials, parcel deliveries or a variety of everyday transport jobs, the rear loading edge is one of the areas where cargo and vehicle regularly come into close contact.
The vehicle-specific aluminium rear bumper protector for the Fiat Doblò K9 covers this exposed section of the rear bumper. It can therefore be used to protect a bumper that is still in good condition or to conceal existing scratches and damage within the area covered by the protector.
All available versions are made from 1.5 mm aluminium and feature a folded edge. Six different surface finishes are available – from classic aluminium chequer plate and silver or black anodised versions to a brushed stainless-steel look and aluminium with machined grooves.
Which bumper protector fits the Fiat Doblò K9?
In short: This aluminium rear bumper protector is designed for the Fiat Doblò K9 from 2022. All six versions are made from 1.5 mm aluminium, feature a folded edge and are attached using special adhesive tape applied to the rear. No drilling or screws are required.
When the transport job keeps changing
A compact commercial vehicle such as the Fiat Doblò is often used for a wide range of tasks. In the morning, the cargo area might contain toolboxes and machines; later in the day, materials, parcels or transport containers may be added. This means that many different items can pass through the rear cargo entrance during everyday use.
These changing transport jobs make the rear bumper an area that can repeatedly come into contact with cargo. When items are lifted, lowered or pulled out of the vehicle, even small contacts can gradually leave visible signs of use.
The aluminium bumper protector covers this exposed section and provides an additional protective surface over the bumper underneath.
For trades, deliveries and versatile transport jobs
The bumper protector is particularly useful when the Doblò K9 is regularly loaded and unloaded. This applies whether the vehicle is permanently equipped for one particular job or handles different transport tasks throughout the working day.
Typical situations at the Fiat Doblò K9 loading edge
| Application |
Typical use of the loading edge |
| Trades & installation work |
Toolboxes, machines and materials are regularly loaded and unloaded. |
| Delivery work |
Parcels and transport containers are frequently moved through the rear cargo entrance. |
| Changing transport jobs |
Items of different sizes and shapes can come into contact with the bumper during loading and unloading. |
Protect the bumper or conceal existing scratches
The bumper protector can be useful on both a well-maintained bumper and one that already shows signs of everyday use.
On a new or well-kept Fiat Doblò, the frequently used loading area can be covered before typical marks begin to appear. If the vehicle has already completed countless loading jobs, existing scratches or damage within the area covered by the protector can be concealed underneath the aluminium surface.
Two ways to use the Doblò K9 bumper protector
| Situation |
Benefit |
| Bumper still in good condition |
The exposed area receives additional coverage during regular loading and unloading. |
| Signs of use already present |
Scratches or damage within the covered area can be concealed underneath the aluminium bumper protector. |
Six aluminium finishes for the Fiat Doblò K9
The bumper protector is available in six different surface finishes. They all share one important specification: every version is made from 1.5 mm aluminium.
The difference lies in the appearance of the visible surface, allowing you to choose the bumper protector not only for its function but also to suit the look of your vehicle.
Available versions of the Fiat Doblò K9 bumper protector
| Version |
Surface finish |
Thickness |
| Aluminium chequer plate |
Classic chequer plate surface |
1.5 mm |
| Silver anodised aluminium chequer plate |
Chequer plate with silver anodised finish |
1.5 mm |
| Black anodised aluminium chequer plate |
Chequer plate with black anodised finish |
1.5 mm |
| Aluminium stainless-steel look |
Brushed aluminium with a stainless-steel appearance |
1.5 mm |
| Matt silver anodised aluminium |
Matt silver anodised surface with machined grooves |
1.5 mm |
| Black anodised aluminium |
Black anodised surface with machined grooves |
1.5 mm |
Chequer plate, stainless-steel look or machined grooves?
As all six versions are made from 1.5 mm aluminium, the choice can primarily be based on the surface appearance you prefer.
Classic aluminium chequer plate gives the rear of the vehicle a functional, technical appearance. Silver anodised and black anodised chequer plate versions are also available for customers who prefer the same characteristic pattern with a different finish.
For a more understated appearance, there is brushed aluminium with a stainless-steel look. This version is still made entirely from aluminium – “stainless-steel look” describes only the appearance of the brushed surface.
Matt silver anodised and black anodised aluminium versions with machined grooves complete the range.
Folded edge for additional loading-edge coverage
During loading and unloading, cargo can come into contact not only with the upper surface of the rear bumper but also with the adjoining section of the loading edge. This is particularly relevant when items are lifted, lowered or pulled out of the vehicle.
For this reason, the bumper protector features a folded edge. The aluminium cover does not simply end on the upper surface but continues over the adjoining section of the loading edge, increasing the area covered by the protector.
Self-adhesive installation without drilling or screws
A high-quality self-adhesive special tape is applied to the rear of the bumper protector. This is used to attach the aluminium cover to the intended area of the rear bumper.
No drilling or screws are required for installation.
Important before installation:
Please read the installation instructions under “Technical Details” completely before fitting the protector and follow the specified requirements during installation.
Technical specifications – Fiat Doblò K9 bumper protector
Fiat Doblò K9 aluminium bumper protector – product specifications
| Feature |
Specification |
| Vehicle |
Fiat Doblò K9 |
| Model year |
From 2022 |
| Material |
Aluminium |
| Material thickness |
1.5 mm |
| Surface finishes |
6 versions |
| Design |
With folded edge |
| Attachment |
Self-adhesive special tape on the rear |
| Drilling / screws |
Not required |
Practical tip: With changing loads, focus on the contact area
If you use your Doblò for different jobs, you may know what is in the cargo area in the morning – but not necessarily what will have joined it by the end of the day. 😄 That is why it makes sense to think beyond one particular type of cargo and focus on the area that all these items pass across.
A toolbox, parcel, machine or transport container may have very little in common, but they all use the same rear cargo entrance. The bumper protector covers exactly the section where these repeated contacts can otherwise leave visible marks over time.
Frequently asked questions about the Fiat Doblò K9 bumper protector
Which Fiat Doblò does the bumper protector fit?
The bumper protector is designed for the Fiat Doblò K9 from 2022.
What material is the bumper protector made from?
All available versions are made from 1.5 mm aluminium.
Is the stainless-steel-look version made from stainless steel?
No. This version is also made from aluminium. “Stainless-steel look” describes the appearance of the brushed surface only.
Which surface finishes are available?
The available versions are aluminium chequer plate, silver anodised aluminium chequer plate, black anodised aluminium chequer plate, brushed aluminium with a stainless-steel look, matt silver anodised aluminium with machined grooves and black anodised aluminium with machined grooves.
Do I need to drill or use screws for installation?
No. The bumper protector is attached using the special adhesive tape applied to the rear. No drilling or screws are required.
Can I cover existing scratches on the bumper?
Yes. Scratches or damage located within the area covered by the bumper protector can be concealed underneath the aluminium cover.
Why does the bumper protector have a folded edge?
The folded edge extends the coverage from the upper surface to the adjoining section of the loading edge, increasing the area covered by the aluminium.
What should I check before installation?
Please read the installation instructions under “Technical Details” completely before fitting the protector and follow the specified requirements.
Prepare the Fiat Doblò loading edge for changing everyday tasks
The Fiat Doblò K9 from 2022 can handle a wide range of transport jobs during everyday commercial use. That versatility also means that many different items may be moved through the rear cargo entrance.
The vehicle-specific 1.5 mm aluminium rear bumper protector covers the exposed bumper area, features a folded edge and is attached using the special adhesive tape on the rear – without drilling or screws.
Six different aluminium finishes also allow you to choose the appearance that best suits your vehicle, ranging from classic chequer plate and a brushed stainless-steel look to silver or black anodised versions.
Payment by Invoice |
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers
