The Citroën Jumpy III from 2016 onwards combines compact exterior dimensions with a versatile cargo area and is therefore widely used for trade, service, installation and delivery work. With frequently changing loads, the two projecting wheel arches are among the areas that can quickly come into contact with toolboxes, materials or transport containers during loading and unloading.
This set of two wheel arch covers made from 3 mm HDPE/ABS plastic provides additional protection for the left and right wheel arches. A practical advantage for the Jumpy III is the broad vehicle assignment: the covers are suitable for the listed L1, L2 and L3/XL versions as well as the specified vehicles with a tailgate or rear barn doors.
Which wheel arch covers fit my Citroën Jumpy III?
In short: These wheel arch covers are designed for the Citroën Jumpy III from 2016 onwards. According to the vehicle assignment, the listed versions include L1, L2 and L3/XL with either a tailgate or rear barn doors. The set includes two covers made from 3 mm HDPE/ABS plastic for the left and right wheel arches.
Jumpy III in L1, L2 or L3/XL – which vehicle length do I have?
Vehicle length is an important factor when identifying the correct Citroën Jumpy III version. Depending on the model, the wheelbase and overall vehicle length differ significantly. If you are unsure which version you have, the following dimensions provide a useful reference.
Citroën Jumpy III – Vehicle Versions and Dimensions
| Version |
Rear doors |
Wheelbase |
Overall length |
Vehicle height |
| L1H1 |
Tailgate |
2,925 mm |
4,606 mm |
1,935 mm |
| L1H1 |
Rear barn doors |
2,925 mm |
4,606 mm |
1,935 mm |
| L2H1 |
Tailgate |
3,275 mm |
4,956 mm |
1,935 mm |
| L2H1 |
Rear barn doors |
3,275 mm |
4,956 mm |
1,935 mm |
| L3H1 / XL |
Tailgate |
3,275 mm |
5,306 mm |
1,935 mm |
| L3H1 / XL |
Rear barn doors |
3,275 mm |
5,306 mm |
1,935 mm |
L2 and L3/XL are particularly easy to distinguish by their overall vehicle length. According to the listed vehicle data, both versions have a wheelbase of 3,275 mm, but the XL version is considerably longer at 5,306 mm overall length.
Three vehicle lengths – different cargo area requirements
The different Jumpy lengths are often chosen for different types of work. The compact L1 is well suited to urban use, while the longer versions provide additional space for tools, materials, parcels or vehicle equipment.
Regardless of vehicle length, the wheel arches remain exposed areas inside the cargo compartment. They project into the usable cargo area and can therefore come into contact with transported goods when items are moved or placed inside the vehicle.
The wheel arch covers provide an additional protective layer between the cargo and these vehicle areas.
Wheel arch protection for trade, service and transport
Commercially used Jumpy vans are rarely driven empty. Depending on the application, the cargo area may contain tool cases, machines, spare parts, parcels or transport containers.
Additional wheel arch protection is particularly useful for:
-
Trade and installation vehicles
-
Service vehicles with tools and equipment
-
Courier and delivery vehicles
-
Vehicles with shelving or workshop systems
-
Frequently changing or regularly moved cargo
The wheel arch covers do not replace any required load-securing equipment. Their purpose is to provide additional protection for the wheel arch areas inside the cargo compartment.
3 mm HDPE/ABS plastic for both sides of the vehicle
According to the product specification, the two wheel arch covers are made from 3 mm HDPE/ABS plastic. The material is flexible and UV-resistant.
The scope of delivery includes two covers: one for the left and one for the right wheel arch. This allows both sides of the cargo area to be protected at the same time.
The covers can be used as part of a newly planned cargo area conversion or installed as an addition to existing interior lining.
Technical specifications – Citroën Jumpy III wheel arch covers
Citroën Jumpy III Wheel Arch Covers – Product Specifications
| Specification |
Details |
| Vehicle |
Citroën Jumpy III |
| Model year |
From 2016 onwards |
| Vehicle lengths |
L1 / L2 / L3 (XL) |
| Rear doors |
Tailgate / rear barn doors according to vehicle assignment |
| Material |
HDPE/ABS plastic according to product specification |
| Material thickness |
3 mm |
| Material properties |
Flexible and UV-resistant |
| Installation options |
Clamping, screwing or bonding |
| Installation hardware |
Not included |
| Scope of delivery |
2 wheel arch covers – left and right |
Combine the wheel arch covers with an existing interior conversion
A Jumpy III does not need a completely new cargo area conversion to add extra protection around the wheel arches. The covers can also be installed as an addition to existing interior lining.
If shelving or workshop equipment has already been fitted, check beforehand whether there is sufficient space around the wheel arches for adjustment and installation.
For a new cargo area conversion, it can be useful to plan the wheel arch protection together with the cargo floor and side wall lining at an early stage. Installation is generally easier while the cargo area is still freely accessible.
Installation by clamping, screwing or bonding
Depending on the existing installation situation, the wheel arch covers can be fitted by clamping, screwing or bonding.
The most suitable fixing method depends on the individual cargo area conversion and the specific installation conditions.
Installation note:
The required installation hardware is not included. Fixings or adhesive must be selected to suit the intended installation method and the individual vehicle setup.
Practical tip: do not identify L2 and L3 by wheelbase alone
If you are unsure whether your Jumpy is an L2 or L3/XL, do not rely on the wheelbase alone. According to the listed vehicle data, both versions have a wheelbase of 3,275 mm.
The more useful reference is the overall vehicle length: L2 measures 4,956 mm, while L3/XL measures 5,306 mm. This difference makes identification considerably easier.
Frequently asked questions about Citroën Jumpy III wheel arch covers
Which Citroën Jumpy models are these wheel arch covers suitable for?
The set is designed for the Citroën Jumpy III from 2016 onwards.
Which vehicle lengths are included?
The listed vehicle assignment includes L1, L2 and L3/XL versions.
How can I distinguish Jumpy L2 from L3/XL?
According to the listed vehicle data, L2 and L3/XL both have a wheelbase of 3,275 mm. Their overall length is different: L2 measures 4,956 mm, while L3/XL measures 5,306 mm.
Are the wheel arch covers suitable for vehicles with a tailgate and rear barn doors?
Yes. The listed vehicle assignment includes versions with both a tailgate and rear barn doors.
Can I combine the wheel arch covers with existing interior lining?
Yes. The covers can be installed as an addition to an existing interior conversion, provided that the wheel arch areas remain sufficiently accessible.
What is included in the scope of delivery?
The set includes two wheel arch covers – one for the left and one for the right wheel arch.
Is installation hardware included?
No. The installation hardware required for the chosen fixing method is not included.
Protect the Citroën Jumpy III wheel arches to suit the vehicle length
From the compact L1 to the long L3/XL, the Citroën Jumpy III is used for a wide range of transport applications. Regardless of vehicle length, the two wheel arches remain exposed areas inside the cargo compartment.
The two 3 mm HDPE/ABS plastic covers provide additional protection for these areas and can be integrated into an existing or newly planned cargo area conversion.
Before ordering, it is particularly useful to check the vehicle length. Once the Jumpy version has been clearly identified, selecting the corresponding wheel arch protection becomes much easier.
Payment by Invoice |
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers
