The 2-meter airline rail with a semi-circular standard profile is a particularly flexible solution for the professional installation of lashing points in transporters, trailers, workshop vehicles, or in the interior of campers. Thanks to its compact length, it is ideal for partial areas such as sliding door areas, rear modules, or loading areas where a 3-meter rail would be too long but a stable mounting structure is required.
Airline rail, semi-circular profile, standard – 2 meters
The rail is made of high-quality aluminum in EN AW-6063 T6 profile and is undrilled. This allows the fastening points to be adapted precisely to the respective installation situation. Whether on side walls, the vehicle ceiling, or on the loading floor – the semi-circular shape ensures a form-fitting, flat support.
The undrilled version allows maximum freedom: it can either be bonded over the entire surface with a structural adhesive such as Sikaflex 554 Black or Sikaflex 554 White, or screwed into place at precisely defined points.
The rail is compatible with all common airline fittings, locking bars, and tension straps. For a professional finish, end caps 102521499 and 102071 can be used as an option.
Technical properties
| Property |
Value |
| Length |
2 meters (1995 mm ± 3 mm) |
| Rail width |
50 mm |
| Installation height |
11.5 mm |
| Hole diameter |
20 mm |
| Grid spacing |
25 mm |
| Material |
Aluminum – bare |
| Weight |
0.76 kg/m |
| Fastening |
Undrilled |
| Origin |
EU |
| Alloy |
EN AW-6063 T6 |
The technical data shows that the 2-meter version offers a good balance: long enough for continuous mounting surfaces, but flexible enough for vehicles with limited side wall length. The choice of fastening method—adhesive bonding, screw connection, or a combination—has a significant influence on the achievable load capacity.
The following LC strength values refer to example fittings. They serve as a guide for the possible tensile forces and illustrate how the load is transferred at different angles.
LC strength
| Fitting |
Single stud (102076) |
Double stud (102036) |
| Z 90° |
500 daN |
1,000 daN |
| X-Z 45° |
500 daN |
1,000 daN |
| Y-Z 45° |
400 daN |
900 daN |
The actual holding force depends largely on the substrate, material thickness, adhesive surface, and screw quality. The installer is responsible for safe installation and the resulting load capacity. When properly installed, the rail is ideal for securing toolboxes, suitcases, bicycles, light machinery, and other transport goods.
FAQs about the 2 m airline rail, semi-circular profile, standard
Why is the 2 m length so often chosen?
It offers an ideal compromise between a long contact surface and high flexibility. Many vehicle side walls have mounting surfaces that are exactly the right length for this.
Can I also use the airline rail in the interior design of campers?
Yes, the undrilled 2 m rail is ideal for furniture modules, rear pull-outs, storage boxes, or ceiling areas in camping vehicles.
What are the best types of fasteners?
Either glue over the entire surface with Sika 554 or screw in place at specific points. The choice depends on the substrate, load, and desired appearance.
Do all airline fittings fit into this profile?
Yes, the rail is compatible with standard fittings, locking bars, lashing straps, and transport modules.
Is it advisable to use end caps?
End caps protect the profile ends, prevent sharp edges, and ensure a professional finish.
Payment by Invoice |
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers
