The Fiat Scudo L3 from 2022 onwards provides a generous floor area for professional vehicle conversions, larger equipment and bulky cargo. To make effective use of this additional space in everyday commercial operation, the cargo floor should be considered as an integral part of the vehicle conversion from the very beginning.
The vehicle-specific aluminium chequer plate cargo floor provides a robust upper working surface. Birch plywood forms the supporting base, while an aluminium five-bar chequer plate surface creates the upper working and loading area. The contours are CNC-machined specifically to fit the cargo area of the Scudo L3.
Does this aluminium chequer plate floor fit my Fiat Scudo L3?
In short: This cargo floor is designed for the Fiat Scudo L3H1 from 2022 onwards with a wheelbase of 3,275 mm and an overall vehicle length of 5,309 mm. The listed panel van configurations with rear barn doors or a tailgate are covered. The floor is available in 9 mm or 12 mm thickness. The 9 mm version can optionally be supplied with recessed Airline Rails.
Fiat Scudo L3 – when the cargo floor becomes part of the working concept
With a long van, the aim is not simply to fit as much as possible into the cargo area. The additional space becomes particularly useful when different working and transport requirements need to be combined within the same vehicle.
Shelving systems or tool cabinets can permanently occupy part of the cargo area, while other sections remain available for machines, materials, transport containers or longer items. The Scudo L3 provides a larger continuous floor area than the shorter versions, giving businesses more freedom when planning a professional vehicle conversion.
For this type of installation, it makes sense to consider the floor at an early stage rather than treating it as the final part of the conversion. The chosen floor configuration can influence how the cargo area is organised and how the remaining open areas can be used later.
Fiat Scudo L3H1 vehicle dimensions from 2022
Before ordering, check both the vehicle dimensions and the rear door configuration. This cargo floor is designed for the long L3H1 version of the Fiat Scudo from 2022 onwards.
Compatible vehicle configurations – Fiat Scudo L3H1
| Version |
Rear configuration |
Wheelbase |
Overall length |
Vehicle height |
| L3H1 |
Rear barn doors |
3,275 mm |
5,309 mm |
1,935 mm |
| L3H1 |
Tailgate |
3,275 mm |
5,309 mm |
1,935 mm |
Note: The vehicle registration document can also be used to help identify the correct version. Please check the registered vehicle dimensions and the relevant vehicle configuration before ordering.
A large floor area for professional equipment and cargo
The additional length of the Scudo L3 is particularly useful when the vehicle needs to accommodate both cargo and a more extensive professional interior. Instead of permanently filling every available section, the cargo area can be divided into different functional zones.
Typical applications include:
-
Trade vehicles with shelving, tools and additional space for materials
-
Installation vehicles carrying machines and extensive equipment for changing job sites
-
Service vehicles with spare parts, tool cabinets and open loading space
-
Mobile workshops with larger permanently installed vehicle equipment
-
Delivery and transport vans carrying larger, longer or bulky goods
The more extensive the vehicle conversion becomes, the more useful it is to plan the cargo floor, permanent equipment and any additional attachment points together before installation begins.
Birch plywood with an aluminium five-bar chequer plate surface
The supporting base of the cargo floor is made from birch plywood. An aluminium five-bar chequer plate forms the upper surface.
The aluminium creates the working and loading surface. Tools, machines, transport containers and other cargo therefore rest on the aluminium rather than directly on the underlying wooden board.
The contours of the floor are CNC-machined specifically for the vehicle and shaped to fit the cargo area of the Fiat Scudo L3.
Wooden floor or aluminium chequer plate floor for the Scudo L3?
The most suitable cargo floor surface depends primarily on how the vehicle will be used. A conventional wooden floor provides a practical foundation for many transport applications. If the Scudo is regularly used as a working vehicle and frequently carries tools, machines, transport containers or dirty materials, an additional aluminium surface can be an interesting alternative.
Comparison: wooden floor and aluminium chequer plate floor
| Feature |
Conventional wooden floor |
Aluminium chequer plate floor |
| Upper working surface |
Wood or coated wooden surface |
Aluminium five-bar chequer plate |
| Surface structure |
Smooth or textured depending on version |
Distinctive five-bar pattern |
| Contact with cargo |
Cargo rests on the wooden surface |
Aluminium forms the upper working surface |
| Typical application |
General cargo area conversions |
Regularly used work and transport vehicles |
| Appearance |
Traditional van floor appearance |
Professional technical aluminium finish |
9 mm or 12 mm – which version suits the Scudo L3?
The aluminium chequer plate cargo floor for the Fiat Scudo L3 is available in 9 mm and 12 mm thickness. An important consideration when choosing between the two versions is whether Airline Rails are to be integrated directly into the floor.
Cargo floor versions for the Fiat Scudo L3
| Version |
Aluminium chequer plate |
Optional Airline Rails |
| 9 mm |
Yes |
Yes |
| 12 mm |
Yes |
No |
If recessed Airline Rails are required, choose the 9 mm version of the cargo floor.
Airline Rails for the large cargo area of the Scudo L3
A larger open floor area can also mean a wider range of transport requirements. The 9 mm version can therefore optionally be supplied with recessed Airline Rails.
The rails are recessed across the direction of travel and bonded into the cargo floor. Combined with suitable Airline Rail accessories such as fittings or lashing straps, they provide additional attachment points that can be incorporated into the vehicle's load-securing setup.
This is particularly useful when the Scudo L3 does not carry the same load every day. Machines, toolboxes, transport containers and other cargo may require different positions and attachment points depending on the job.
Important:
Recessed Airline Rails are available exclusively with the 9 mm version of the cargo floor.
Installing the cargo floor in the Fiat Scudo L3
The individual floor sections are positioned precisely inside the cargo area and screwed together. This creates a continuous floor surface shaped to the vehicle-specific contours.
The supplied recessed lashing-point cups are fitted into the prepared cut-outs and secured using the vehicle's original lashing points.
Before final installation, it is advisable to position all floor sections inside the vehicle and check their alignment. With the larger floor area of the L3, this also makes it easier to check the position of the individual sections and their transitions before they are finally connected.
Technical specifications of the Fiat Scudo L3 cargo floor
Fiat Scudo L3 aluminium chequer plate floor – product specifications
| Feature |
Specification |
| Vehicle |
Fiat Scudo L3H1 |
| Model year |
From 2022 onwards |
| Base material |
Birch plywood |
| Floor thickness |
9 mm or 12 mm |
| Surface |
Aluminium five-bar chequer plate |
| Manufacturing |
CNC-machined and vehicle-specific |
| Lashing-point cups |
Included |
| Airline Rails |
Optional with 9 mm version |
| Vehicle type |
Panel van |
Please check before ordering:
This cargo floor is not suitable for passenger/combi vehicles with seat rails or double-cab versions. It is designed exclusively for the corresponding panel van.
Practical tip: Think in zones when planning the long Scudo
The additional space in the Scudo L3 can make it tempting to fill the cargo area step by step. A better approach is to define functional zones before starting the conversion: Where will permanent shelving or cabinets be installed? Which area will be reserved for frequently used machines? And which section should remain as flexible as possible for changing loads?
If the 9 mm version with Airline Rails is selected, their future use should also be included in this planning. This helps keep useful attachment points accessible rather than hiding them underneath shelving or tool cabinets. With more than five metres of overall vehicle length, there is plenty of space available – there is no need to fill every centimetre on day one. 😄
Frequently asked questions about the Fiat Scudo L3 aluminium chequer plate floor
Which Fiat Scudo is this chequer plate floor designed for?
The floor is designed for the Fiat Scudo L3H1 from 2022 onwards with a wheelbase of 3,275 mm and an overall vehicle length of 5,309 mm.
Does the cargo floor fit versions with rear barn doors and a tailgate?
Yes. The listed vehicle configurations include the Fiat Scudo L3H1 with both rear barn doors and a tailgate.
Which floor thicknesses are available for the Fiat Scudo L3?
The aluminium chequer plate cargo floor is available in 9 mm and 12 mm.
Can the Scudo L3 cargo floor be ordered with Airline Rails?
Yes. Recessed Airline Rails are optionally available with the 9 mm version. This option is not available with the 12 mm version.
How are the Airline Rails positioned in the cargo floor?
The optional Airline Rails are recessed across the direction of travel and bonded into the cargo floor.
Are the recessed lashing-point cups included?
Yes. The required lashing-point cups are included and are secured using the vehicle's original lashing points.
Does the floor fit a Fiat Scudo double cab?
No. The floor is designed exclusively for the corresponding panel van and is not suitable for passenger/combi vehicles with seat rails or double-cab versions.
Making effective use of the large Fiat Scudo L3 cargo area
The Fiat Scudo L3 from 2022 onwards provides additional space for businesses that need to carry more than individual toolboxes or smaller loads. Larger vehicle installations, machines, materials and open loading space can all be combined within the same van.
The vehicle-specific aluminium chequer plate cargo floor provides a foundation shaped to fit the cargo area. Birch plywood forms the supporting base, while the aluminium five-bar chequer plate creates the upper working and loading surface.
With optional recessed Airline Rails in the 9 mm version, the large floor area can also be equipped with flexible attachment points for changing transport requirements. This means the long Scudo offers more than simply additional space – its cargo area can be organised around the different jobs the vehicle needs to perform.
Koskisen Oje
Tehdastie 2
16600 Järvelä
Finnland
info@koskisen.com