Aluminum roof rack for the Peugeot Boxer - L2H2
The roof rack for the Peugeot Boxer, built from 2006 onwards, with a wheelbase of 3,450 mm and high roof - H2 is made of aluminum.
The lightweight and aerodynamic aluminum roof rack comes with a loading roller and front spoiler.
The loading roller makes it easier to load and unload long, bulky goods, and the front spoiler reduces driving noise and minimizes fuel consumption.
Roof racks significantly expand the storage space of your van. This makes it possible to transport more goods or tools and use the cargo space more effectively.
With two people, installation takes approximately 45 minutes.
The load capacity approved by the vehicle manufacturer is 150 kg. However, the tested load capacity of the roof rack is up to 180 kg.
For vehicles built in 2006 or later with the following vehicle dimensions:
| Designation |
Rear door(s) |
Wheelbase |
Overall length |
Vehicle height |
Roof rack size |
| L2H2 |
Wing doors |
3,450 mm |
5,413 mm |
2,524 mm |
3,000 x 1,580 mm |
Note: You will find the vehicle length in the vehicle registration document under point: 18, the vehicle height under point: 20, and the year of manufacture under point: 6. (Applies to German vehicle registration documents)
Features and characteristics of the roof rack
The basic equipment includes the mounting feet, front spoiler, and loading roller.
The workmanship is high quality, and with its improved aerodynamic design, the roof rack saves fuel and generates less noise when driving at speed.
The system is robust and ideally suited for intensive use.
Thanks to the innovative mounting system, the crossbars can be inserted and positioned flexibly.
With the well-designed screw system, the roof rack can be mounted in no time.
Features at
a glance - Basic equipment includes mounting feet, front spoiler, and loading
roller - High quality, with aerodynamically improved
design for lower fuel consumption and less noise - Robust system - For intensive use
- Innovative mounting system -
Quick to install by sliding in the crossbars and using the sophisticated screw system - Can be expanded with extensive accessories
Optional accessories for the Cruz aluminum roof rack The roof rack can
be expanded with a wide range of accessories, including components from other manufacturers such as Rhino Products. Expandable accessories
include: ladder holders, load secures for fastening with lashing straps, transport tubes, or, depending on the vehicle, a rear door ladder.
All accessories are supplied with the appropriate mounting hardware, where necessary.
Load securing limiters
The four 10 cm high load securing devices are limiters that prevent the goods being transported from rolling back and forth. Lashing straps
can also be attached to the load securing devices to secure the load.
Ladder holder
With the ladder holder, it is possible to secure ladders quickly and easily without the complicated handling of lashing straps.
Ladders with up to four sections can be transported.
The scope of delivery consists of one pair, and two ladder clamps for the front and rear are always included.
The dead weight is 2.5 kg.
Transport tube
The aluminum transport tube is suitable for transporting long goods such as copper pipes or roof battens. The transport tube
is available in lengths of 2 m, 3 m, and 4 m. There are closable openings at the ends.
Alternatively, the Rhino transport tube can also be mounted up to a length of 5 m.
Walkway
The walkway is suitable for walking on the roof rack.
It is easily and simply attached to the crossbars with clamps. Several
sections are supplied for longer vehicles.
Stainless steel tailgate ladder
The tailgate ladder makes it easier to load and unload the roof rack. This makes it easier
to load bulky items or fill the transport tube.
The tailgate ladder for permanent installation is attached directly to the door leaf. The clampable stainless steel ladder is clamped to the top and bottom of the tailgate.
Installation of Cruz aluminum roof racks
The Cruz roof rack is mounted on the fixing points specified by the vehicle manufacturer.
Plastic caps can be seen on the roof of your van. The fixing points are located underneath these caps.
These plastic caps are removed and the mounting feet are screwed into place. The
mounting feet must first be attached to the roof rack. We will be
happy to send you the installation plan, or you can view it under "Technical Details."
Cruzber
Pol. Ind. Las Salinas II, parc. 12
14960 Rute (Córdoba) Spain
Spanien
info@cruzber.com
Payment by Invoice | 
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers
