Anti-slip mat for Mercedes Benz Vito Type W447
The rubber floor for MB Vito from model year 2014 - Type W447 is available for the following wheelbases:
- Wheelbase: L1 = 3,200 mm - Cargo area length: 2,586 mm - Total vehicle length: 4,895 mm
- Wheelbase: L2 = 3,200 mm - Cargo area length: 2,831 mm - Total vehicle length: 5,140 mm
- Wheelbase: L3 = 3,430 mm - Cargo area length: 3,061 mm - Total vehicle length: 5,370 mm
Only for panel vans without seats!
The rubber floor consists of a 3 mm thick styrene-butadiene rubber mat.
The material is REACH-compliant.
The surface of the rubber mat is additionally perforated to prevent slipping.
However, it is not certified as an anti-slip mat for securing loads! A sliding friction coefficient has not been determined!
Cobra SBR rubber mats are shock-absorbing, sound-absorbing, non-slip, and provide excellent insulation.
The rubber mats are suitable for the following areas of application: water, air, dry and wet chemicals, organic acids, alcohol, ketones, and aldehydes. The
rubber mats are not suitable for acids, ozone, fats, oil, lubricants, or almost all fuels.
Note: Due to the possible odor formation from the rubber, the mat is not suitable for motorhomes, transporters without partition walls, and vehicles used for food transport.
Technical data SBR rubber
- Hardness 75° Shore +/- 5 according to DIN53505
- Elongation at break 200% according to
DIN53504 - Tensile strength 3 MPa according to DIN53504
- Temperature resistance -20°C to +70°C
- Density grs/cm³ 1.5 according to DIN53508
- Compression at 70°C for 22 hours 20% according to DIN53517
Zenith Rubber Europe B.V.
Utrechtsestraatweg 230
3911 TX Rhenen
Niederlande
info@zenitheurope.com