Anti-slip mat for Renault Master and Nissan NV 400 / Interstar
Anti-slip rubber floor for the Renault Master from
2010 to 2024, Nissan NV400 from
2010 to 2022, and Nissan Interstar from
2022 to 2024. Suitable
for the following vehicle sizes:
| Designation |
Drive type |
Wheelbase |
Overall length |
Vehicle height |
Cargo space length |
| L1H1 |
Front-wheel drive |
3,182 mm |
5,048 mm |
2,307 mm |
2,583 mm |
| L1H2 |
Front-wheel drive |
3,182 mm |
5,048 mm |
2,500 mm |
2,583 mm |
| L2H2 |
Front-wheel drive |
3,682 mm |
5,548 mm |
2,500 mm |
3,083 mm |
| L3H2 |
Rear-wheel drive |
3,682 mm |
6,198 mm |
2,527 mm |
3,733 mm |
| L3H2 |
Front-wheel drive |
4,332 mm |
6,198 mm |
2,488 mm |
3,733 mm |
| L4H2 |
Rear-wheel drive |
4,332 mm |
6,848 mm |
2,557 mm |
4,383 mm |
The rubber floor consists of a 3 mm thick styrene-butadiene rubber mat.
The material is REACH compliant.
The surface of the rubber mat is additionally perforated to make it slip-resistant.
However, it is not certified as an anti-slip mat for securing loads! A sliding friction coefficient has not been determined!
The rubber mats are suitable for the following areas of application: Water, air, dry and wet chemicals, organic acids, alcohol, ketones, and aldehydes. The
rubber mats are not suitable for acids, ozone, fats, oil, lubricants, or almost all fuels.
Note: Due to the possible odor formation from the rubber, the mat is not suitable for motorhomes, transporters without a partition wall, or vehicles used to transport food!
Technical data SBR rubber
Cobra SBR rubber mats are shock-absorbing, sound-absorbing, non-slip, and provide excellent insulation.
Hardness 75° Shore +/- 5 according to
DIN53505- Elongation at break 200% according to
DIN53504- Tensile strength 3 Mpa according to
DIN53504- Temperature resistance -20C to
+70C- Density grs/cm³ 1.5 according to DIN53508
- Compression at 70°C for 22 hours 20% according to DIN53517
Zenith Rubber Europe B.V.
Utrechtsestraatweg 230
3911 TX Rhenen
Niederlande
info@zenitheurope.com