Anti-slip mat made of 3 mm thick rubber for VW Caddy
Anti-slip mat for Caddy and Caddy Maxi from model year 2004 to 2020. Not for VW Caddy 5 from model year 2021!
Note: Only for panel vans, not for station wagons with rear seats!
If a cup holder is installed, it must be removed or cut out.
- Wheelbase L1 = 2,682 mm - Cargo area length = approx. 1,780 mm - Total vehicle length: 4,408
mm - Wheelbase L2 = 3,002 mm - Load compartment length = approx. 2,250 mm - Total vehicle length: 4,878 mm
The rubber floor consists of a 3 mm thick styrene-butadiene rubber mat.
The material is REACH compliant.
The surface of the rubber mat is additionally perforated to prevent slipping.
However, it is not certified as an anti-slip mat for securing loads! A sliding friction coefficient has not been determined!
The rubber mats are suitable for the following areas of application: water, air, dry and wet chemicals, organic acids, alcohol, ketones, and aldehydes.
The rubber mats are not suitable for acids, ozone, fats, oil, lubricants, or almost all fuels.
Note: Due to the possible odor formation from the rubber, the mat is not suitable for motorhomes, transporters without a partition wall, or vehicles used to transport food!
Technical data SBR rubber
Cobra SBR rubber mats are shock-absorbing, sound-absorbing, non-slip, and provide excellent insulation.
Hardness 75° Shore +/- 5 according to
DIN53505- Elongation at break 200% according to
DIN53504- Tensile strength 3 Mpa according to
DIN53504- Temperature resistance -20C to
+70C- Density grs/cm³ 1.5 according to DIN53508
- Compression at 70°C for 22 hours 20% according to DIN53517
Zenith Rubber Europe B.V.
Utrechtsestraatweg 230
3911 TX Rhenen
Niederlande
info@zenitheurope.com
Payment by Invoice |
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers