Rubber mat for VW Crafter and Mercedes Sprinter
The anti-slip rubber mat for the Mercedes Sprinter from model year 2006 (type 906) and from model year 2018 (type 907) with rear-wheel drive reduces the sliding friction coefficient and thus ensures a non-slip surface.
The load is more stable in the cargo area and the preload forces required to secure the load can be reduced.
The anti-slip mat is available for the following vehicle sizes:
| Designation |
Drive type |
Wheelbase |
Overall length |
Vehicle height |
Cargo space length |
| L2H2 |
Rear-wheel drive W906/907 |
3,665 mm |
5,932 mm |
2,620 mm |
3.2 m x 1.6 m |
| L3H2 |
Rear-wheel drive W906/907 |
4,035 mm |
6,967 mm |
2,616 mm |
4.4 m x 1.6 m |
| L4H2 |
Rear-wheel drive W906/907 |
4,035 mm |
7,367 mm |
2,613 mm |
4.8 m x 1.6 m |
Note: The vehicle length can be found in the vehicle registration document under item: 18, the vehicle height under item: 20 and the year of manufacture under item: 6. (Applies to German vehicle registration documents)
Not for front-wheel drive vehicles (Sprinter type 910)!
Features of the anti-slip mat for the Mercedes Sprinter
The rubber floor consists of a 3 mm thick styrene-butadiene rubber mat.
The material is REACH compliant.
The surface of the rubber mat is additionally perforated to prevent slipping.
However, it is not certified as an anti-slip mat for securing loads! A sliding friction value has not been determined!
The rubber mats are suitable for the following areas of application: Water, air, dry and wet chemicals, organic acids, alcohol, ketones, and aldehydes. The
rubber mats are not suitable for acids, ozone, fats, oil, lubricants, or almost all fuels.
Note: Due to the possible odor formation from the rubber, the mat is not suitable for motorhomes, transporters without a partition wall, or vehicles used to transport food!
Technical data SBR rubber
Cobra SBR rubber mats are shock-absorbing, sound-absorbing, non-slip, and provide excellent insulation.
Hardness 75° Shore +/- 5 according to
DIN53505- Elongation at break 200% according to
DIN53504- Tensile strength 3 Mpa according to
DIN53504- Temperature resistance -20C to
+70C- Density grs/cm³ 1.5 according to DIN53508
- Compression at 70°C for 22 hours 20% according to DIN53517
Zenith Rubber Europe B.V.
Utrechtsestraatweg 230
3911 TX Rhenen
Niederlande
info@zenitheurope.com
Payment by Invoice | 
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers
