This electric step for the Mercedes eSprinter built from 2024 onwards was developed specifically for the fully electric W907 generation. It makes daily access easier in urban delivery traffic, service use, or fleet operation—comfortably, safely, and reliably.
With a stable step surface measuring 975 x 248 x 45 mm and a maximum load capacity of 250 kg, the entry aid offers a resilient solution for professional continuous use.
Is an electric step useful for the Mercedes eSprinter?
Yes. The Mercedes eSprinter has a raised entry edge, especially in commercial use. An electric step makes getting in and out much easier, offers a load capacity of up to 250 kg, and is ECE R10-compliant for safe use in electric vehicles.
Suitable for Mercedes eSprinter (W907, from 2024)
🚐 Vehicle assignment – Mercedes eSprinter
| Designation |
Drive type / model |
Wheelbase |
Overall length |
Vehicle height |
| L2H2 |
Electric drive W907 |
3,665 mm |
5,932 mm |
2,620 mm |
Convenient automatic function
The electric step extends automatically when the right-hand sliding door (passenger side) is opened and retracts again when it is closed – with an extension time of approx. 2 seconds.
- Anti-trap protection with automatic shut-off
- RGB status display in the driver's area
- Automatic, manual, and combined modes
- Camping mode for stationary operation
- Very low standby consumption
- Electronic end position detection
- ECE R10-compliant electronics (EMC tested)
The design is rated for loads of up to 250 kg and offers maximum safety for frequent entry and exit.
Conclusion: The ideal entry-level solution for the Mercedes eSprinter
This electric step for the Mercedes eSprinter from 2024 combines comfort, safety, and modern e-vehicle technology. It is the optimal retrofit solution for commercial electric fleets, service vehicles, and urban delivery services.
Frequently asked questions about the Mercedes eSprinter electric step (from 2024)
For which eSprinter is the step suitable?
Suitable for Mercedes eSprinter W907 from 2024 in the L2H2 variant with electric drive.
Is the step specially approved for electric vehicles?
Yes, it is ECE R10-compliant and tailored to the vehicle electronics of the eSprinter.
What is the maximum load capacity?
The step is designed for a load of up to 250 kg.
What are the dimensions of the step surface?
The step surface measures 975 x 248 x 45 mm.
On which side of the vehicle is it installed?
It is installed exclusively on the right-hand sliding door (passenger side).
Payment by Invoice |
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers