The automatic step for Toyota ProAce Max models built from 2024 onwards ensures safe, ergonomic, and comfortable access in demanding everyday working conditions. Especially in the new ProAce Max with its raised entry edge, the step noticeably reduces the height difference—ideal for tradespeople, service fleets, couriers, and delivery services.
With a generous step surface measuring 975 x 248 x 45 mm and a load capacity of up to 250 kg, this entry solution is consistently designed for professional continuous use. Stable, durable, and practical—developed for businesses that get in and out every day.
What are the benefits of an automatic step on the Toyota ProAce Max?
It significantly reduces the entry height, increases safety and relieves strain on the knees and back – with a load capacity of up to 250 kg and a choice of electric or mechanical versions.
Efficiency counts in everyday commercial life. Anyone who makes dozens of stops every day knows that every ergonomic advantage saves energy – and, at the end of the day, time too.
Why a step is useful on the Toyota ProAce Max
Whether it's a construction vehicle, service vehicle, or delivery van, frequent getting in and out puts strain on joints and muscles in the long term. An automatic step for the Toyota ProAce Max noticeably improves ergonomics, increases safety in wet or dark conditions, and reduces the risk of accidents in everyday work.
Electric or mechanical version – which one suits your application?
For the Toyota ProAce Max from 2024, the step is available either as an electric comfort version or as a mechanical, door-coupled variant. Both systems are designed for maximum load capacity and continuous commercial use.
-
Electric: automatic extension and retraction when opening and closing the right-hand sliding door
-
Mechanical: purely mechanical control via door arm – no electrical connection
Both versions reliably support up to 250 kg.
To help you choose the right version for your vehicle, you can find the compatible vehicle sizes here.
Suitable for Toyota ProAce Max
🚐 Vehicle sizes – Toyota ProAce Max (from 2024)
| Designation |
Rear door(s) |
Wheelbase |
Overall length |
Vehicle height |
| L2H1 |
Wing doors |
3,450 mm |
5,413 mm |
2,254 mm |
| L2H2 |
Swing doors |
3,450 mm |
5,413 mm |
2,524 mm |
| L3H2 |
Swing doors |
4,035 mm |
5,998 mm |
2,524 mm |
| L3H3 |
Swing doors |
4,035 mm |
5,998 mm |
2,764 mm |
| L4H2 |
Swing doors |
4,035 mm |
6,363 mm |
2,524 mm |
| L4H3 |
Swing doors |
4,035 mm |
6,363 mm |
2,764 mm |
Note: The vehicle length can be found in the vehicle registration document under item 18, the vehicle height under item 20, and the year of manufacture under item 6 (German registration).
Depending on the application profile, the comfort and range of functions of the two variants differ significantly.
Electric step – maximum comfort in everyday use
The electric version extends automatically when the right-hand sliding door (passenger side) is opened and retracts again when it is closed. The extension time is approx. 2 seconds – fast, quiet, and reliable.
- Anti-trap protection with automatic shut-off
- Status display in the driver's area
- Automatic, manual, and combined modes
- Camping mode for stationary operation
- Very low standby consumption
- Electronic end position detection
- ECE R10-compliant electronics
- Load capacity up to 250 kg
Mechanical step – robust & low-maintenance
The mechanical, door-coupled version works completely without an electrical connection. A sturdy actuating arm is mounted directly on the right-hand sliding door and controls the movement purely mechanically.
- No power connection required
- Extremely robust construction
- Low maintenance and durable
- Ideal for construction site and fleet vehicles
- Load capacity up to 250 kg
A direct comparison shows which variant is more suitable.
Electric or mechanical – a direct comparison
🔍 Comparison – electric vs. mechanical step (Toyota ProAce Max)
| Criterion |
Electric |
Mechanical |
| Activation |
Motor via door signal |
Via door arm on the sliding door |
| Comfort |
Very high |
Functional & robust |
| Load capacity |
250 kg |
250 kg |
| Power consumption |
Very low quiescent current |
No power connection |
| Recommended for |
Service, delivery traffic, mobile services |
Construction sites, trades, fleet operations |
Both versions are designed for durability and daily use – the decision depends primarily on the desired level of comfort and area of application.
Conclusion: Greater safety for your Toyota ProAce Max
The automatic step for the Toyota ProAce Max from 2024 is a well-thought-out solution for businesses that value ergonomics, safety, and efficiency. Whether you choose the comfortable electric version or the uncompromisingly robust mechanical version, you are investing in a sustainable improvement to your everyday working life.
Frequently asked questions about the Toyota ProAce Max step
Which ProAce Max models is the step suitable for?
Suitable for Toyota ProAce Max models from 2024 onwards in the L2H1 to L4H3 variants.
What is the maximum load capacity?
The maximum load capacity is 250 kg.
What are the dimensions of the step surface?
The step surface measures 975 x 248 x 45 mm.
On which side of the vehicle is it installed?
It is installed exclusively on the right-hand sliding door (passenger side).
Is there an electric and a mechanical version?
Yes, the step is available as an electric comfort version and as a mechanical, door-coupled version.
Payment by Invoice | 
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers